My first post looking for advice. I have oil droplets coming out of my dip stick when I pull it out when running. I have looked everywhere and do not see a Pcv valve anywhere. Now what am I just blind. Runs fine not using antifreeze. I did a compression test 1 was a little better than 2 3&4 about 95 psi. 1 was about 100 psi. Did compression test and added oil to cylinders 2 were not affected same psi other 2went up about 10 psi. Help! Just a retired guy with 8 old cars need help with this issue. Thanks
1971 Saab 96 v4 crankcase pressure
Join the discussion
Recommended Reading
-
Factory Parts Catalogue
92, 93, 95, 96 & Sonett Workshop- Vintage ModelsI have an official factory parts catalogue for the Saab Sonett 1966 - 1974. It's in perfect conditionperfect. I'd love for a true enthusiast to have this. It's free, except for actual shipping cost. Please contact me at [email protected]- 3
- 70
-
CGoldbaum · updated
-
Checking out a Sonett III tomorrow!
92, 93, 95, 96 & Sonett Workshop- Vintage ModelsHi Guys, I am a 3x SAAB owner, but all relatively "newer"; a 2001 9-3 sedan (sold), 2003 9-3 vert (sold) and a 9000CSE, resurrected and running happily so far.... Tomorrow I am going to scope out a well maintained but longtime sleeping lime green '73 Sonett III. Done a lot of reading here on...- 3
- 193
-
New 1964 96 Two Stroke Owner Here
92, 93, 95, 96 & Sonett Workshop- Vintage ModelsNew to two strokes, not to Saabs! Long story short, my late boss's family gifted me one of his prized possessions, his bullnose he called "putt putt". Putt has been driven sparingly for the 10 years or so I knew John, and I was ecstatic and really moved that they wanted me to have it. I...- 5
- 696
-
KaMiKaZi_t0M · updated
-
Question on the Inner CV Drive shaft
92, 93, 95, 96 & Sonett Workshop- Vintage ModelsOn the inner shaft (the short stubby one that goes into the transmission) is there a snap ring or lock ring to secure it. I see that the shaft has a groove, but don't know if it uses a ring that is integrated with the differential, or I need to have a ring present. If it needs a ring, any idea...- 3
- 382
-
Bleed 2 Stroke Brakes, Help!
92, 93, 95, 96 & Sonett Workshop- Vintage ModelsHello all, Time to get Putt Putt roadworthy for some driving this year. The brake fluid looked and has the consistency of motor oil, time to flush. I've successfully cracked all bleeders loose, however I cannot get any fluid out of the rear calipers. The front bleed properly, however nothing...- 5
- 221
-
KaMiKaZi_t0M · updated
Join now to ask and comment!