Search Results for ‘wastegate actuator’

For the last few months I have been trying to sort out all of the issues I have in my 09' 9-3 aero xwd sport that where left over from the previous owner. One of the issues which has been an on and off problem is that the car under acceleration onto the highway or passing will flutter or jump...

So my base boost was pretty sad, barely into the yellow, and I narrowed it down to a tired wastegate actuator. I ended up picking up a spring set from napa for 6 dollars and used a spring that was as close to the one Peva showed he had used on his: My bracket didn't look anything like...

Name: Tyler Location - additional details: Virginia (rva) Means of contact:Prefer email Email : [email protected] Text/phone 804 386 2140 Price:SOLD 200 for turbo buyer pays shipping SOLD 225+shiping for turbo and cobra intake/ pcv hose - cobra pipe has some mild porting asking 75+...

Ive narrowed down my turbo issues on my 92 turbo to the wastegate actuator. I'm going to pick up a kinugawa one here: http://shopping.kinugawaturbo.com/ki...184-02000.aspx My questions are, 1) can I go with a .8 or 1 bar spring with an otherwise stock setup or will I be running too lean? 2)...

Ive narrowed down my turbo issues on my 92 turbo to the wastegate actuator. I'm going to pick up a kinugawa one here: http://shopping.kinugawaturbo.com/kinugawabilletadjustableturboactuatorsaab900te0512b49184-02000.aspx My questions are, 1) can I go with a .8 or 1 bar spring with an...

I just received my Forge wastegate actuator (so happy) to put on my 1995 9000 aero. Big question, it does not come with the two bolts to fit it!! I have no idea what the thread size and length is for this bolt, the old ones were so rusted they had snapped the heads when removing the old wastage...

So i have been through quite a bit with my 1995 saab 9000 aero. I recently replaced the turbo and am waiting for the forge WGA. The question is this. If I drive super carefully, i.e dont spike the turbo, can I actually drive the car without damaging the engine or turbo? I have to go to a funeral...

Hi all, I've got to replace the wastegate actuator / vacuum box on an 04 Aero (TD04 turbo unit) and I was wondering if anyone had done this before and if so how did you set the opening psi? I've got a stage 0 so 4-6psi should do it. Did you replace with OEM and did you find a reasonable...