SaabCentral Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Rented the tool from advanced. Doesn't work. Suggestions for where I can can my hands on one? Brian
  2. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    So I hit some ice this winter in my '08 9-3 2.0t and clocked a curb, bent my left side inner tie rod all to hell. Ordered the part from however it was mis-advertised, and apparently for the 9-5. Bolt on the rack end is too large for the 9-3. Off to e-bay Got a part that was...
  3. NG900 & OG9-3 Workshop
    I am planning on replacing my inner and outer tie rods this weekend. One driver side is loose between at the adjustment nut which requires a new inner and outer, plus a new nut. The passenger is seized up. The bushing end looks easy however I am not sure what I am in for on the Inner rod...
  4. NG900 & OG9-3 Workshop
    Hello. The inner and outer right tie rods were replaced on the car (inner: CP MON 73453 and outer: CP MOOG 3237). A few months later I took car in for alignment and asked the mechanic to look into a banging around on the front right. Result: Loose outer tie rod. They replaced that MOOG with...
  5. 9-5 Workshop
    Hi friends. I've been searching around for a tierod end replacement walkthrough, as i've never done one before. I understand this is novice DIY work, but was hoping someone might point me toward a step-by-step to make the process go more smoothly. Thanks!
1-5 of 5 Results