SaabCentral Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 8 Results
  1. 9-5 Workshop
    Hi, i have a 2001 9-5 aero. Recently i took the NSS out to clean it as they tend too gunk up. After putting it back in it clearly wasn't outputting signal, as i couldn't see which gear is was in the instrument panel. Eventually the bulbs lighting the gears themselves in the gauges also went...
  2. 9-5 Workshop
    I was changing my wheel bearing/hub assembly and while I was doing this a cog sprung out after I removed the hub. I'm pretty sure that was the cog the wheel speed sensor uses to measure the speed of the wheel. I also noticed it was split in one place. Not sure if that is supposed to be like...
  3. 9-5 Workshop
    2001 Saab 9-5 Aero – 139k: P0743 Troubles, Shifting Issues Hello All, Below you will find an extremely concise summary of the history and issues of our 01 9-5 Aero. We did our best to keep this as short as possible, so if you want any more details let us know! We've been on all the boards a LOT...
  4. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hi SC! First post here... Only been into Saab past few years but fell in love with the cars instantly especially when they are working just right. :cheesy: Which has me asking about a problem with my 2003 2.0T arc trans that has left me lost of what to do after many days and hours of...
  5. 9-5 Workshop
    I was cleaning the engine and noticed a vaccume hose was off. It is connected on the tranny but I don't know where the other end goes. What I can find on the WIS show that it joins in with electrical wiring but doesn't show what it connects to.;oops: Might be my fault with the WIS seeing that I...
  6. 9-5 Workshop
    My Saab will run a fine but after a few miles, give or take, the transmission starts to slip requiring a high RPM to keep going. The fluid looks good and no debris on the dipstick..after letting it rest a while, it runs eventually will do the same thing.. I've read about trans flush...
  7. 9-5 Workshop
    Has anyone found a good source for rebuilt (or low mileage used) Transmission Control Modules? I checked BBA-reman who did my ABS and SID but they apparently dont do the TCM... Any suggestions? Thanks, Phil 2001 9-5 3.0Ltfi 175,000 miles
1-7 of 8 Results