SaabCentral Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 8 Results
  1. 9-5 Workshop
    Hello! I am preparing myself emotionally to replace my 2001 9-5's #1 Piston's rings--it has poor compression and improves significantly on a wet test. My head is already off, and I was wondering what the best way to support the engine is once the transmission mount comes off to drop the sump...
  2. 99 & 90 Workshop
    Hi Friends. I believe I need a new front motor mount for my 1976 SAAB 99 GL manual (I am assuming the rubber cushion has worn out), but the rubber "cushion" is apparently no longer available: P/N 8379281 / 837928. I have scoured the entire earth, and have found 0. Does anyone know of a generic...
  3. 9000 Workshop
    On my '95 9000 Aero, trying to diagnose why I was only getting heat out of the vents (fresh air flap stepper motor arm had come disconnected - reconnected arm and problem solved ;ol;) Anyway, poking around found that someone had pulled the RH side air vent in the past and AHA, I figured out...
  4. Saab Events
    Does anyone know if there is an Edmonton saab support event planned for Jan 14 or 15? I will be in the Edmonton area with my Saab that weekend so I thought I should check. Cheers
  5. Saab Events
    I would like to kick off the first post for CT drivers to take in part of the world wide We Support Saab “We are many, We are Saab” Event. If you have not herd about the event yet, you can read more about it here: The...
  6. Parts for Sale/Wanted - North America
    2003-2007 Saab 9-3 front bumper support. New. OEM part # 12777898. Made in Sweden. Cost $50. Shipping available for an extra charge.
  7. NG900 & OG9-3 Workshop
    One of my 2000 93 hood lifts developed a leak, so I went online, knowing better than to talk to the dealer about it. However, the cheapest I could find were all around $40 US each or $60 for a pair - but that wouldn't do, too much. I went to Autozone the other day and there I found a rack full...
1-7 of 8 Results