SaabCentral Forums banner
sump
1-9 of 10 Results
  1. 9-5 Workshop
    Hello Saab fans. I am currently taking off the sump to clean it. I have found the famous 2 hidden bolts on the sump and have gotten one of them out. The other one, the one farthest towards the back of the car, i cannot find a way to loosen. My tools come in at an angle, and aren't even...
  2. 9-5 Workshop
    Hello All Saab fans!! I have today an issue with my oil pressure, my oil level was very low so in view to change the oil i was considered to wait few days ..but today my mind are changed and i refill my engine with an semi synthetic 10w40 i continue to drive and climbing an highway, at that...
  3. NG900 & OG9-3 Workshop
    Hi Guys, I've searched the forum for this subject, but I didn't really find a definitive answer, so I hope you don't mind me starting a new thread. I have a 2001 9-3 which had a reconditioned B235R engine (T7 ignition) fitted 40,000 km ago. I have religiously changed the engine oil and had it...
  4. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Moved to Workshop - can't see how to delete this post. FAQ says go to edit, but there is no delete option here in my view.
  5. New Member Introductions
    Hey, ya'll. If you check my posts, you can see what is up. I can really use some assistance. Fresh battery, oil change, good coolant. Current concern is changing out the DIC & plugs, not such an issue. Need to check the oil sump & PCV lines - any help around?
  6. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Has anyone seen a good walk-though/guide for: Valve Cover Clean Sump Drop & Clean Sorry if this is posted somewhere obvious, and i missed it.
  7. 9-5 Workshop
    Dropped the oil pan today... cleaned up and everything. Didnt look awful, screen was clogged some it appeared. Restarted car later and it sounded much more quiet which is good. The reason I dropped the pan though was because of the low oil light coming on and awful engine ticking and engine...
  8. 9-5 Workshop
    Hi All, After removing some sludge I have my sump off and can't get it back on. No amount of jacking the transmission is helping. It's less than 2mm from slipping past the transmission and back home but it's no good. Are there any tips anyone has for getting the sump pan back on? Are there any...
  9. 9-5 Workshop
    Hi Guys, I completed a big anti sludge inspection on my 1999 9-5 SE 2.3t Estate. It didn't go great as I lacked certain tools and had to keep going on near fruitless shopping trips for them. Anyway I know everyone loves pictures so I captured as much as possible. I've also tried to show some...
1-9 of 10 Results
Top