SaabCentral Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. NG900 & OG9-3 Workshop
    Title basically says it all. When loosening the pinch bolt to adjust the gear change linkage, I inadvertently disconnected the linkage at the point where it leaves the bulkhead. I can still see where the two parts need to come together. Any advice on reconnecting them, hopefully without having...
  2. C900 Workshop
    Was trying to pry the shifter ball off the top of the shift rod and ended up putting too much torque on the rod itself and something snapped underneath. Now the rod itself has play and can twist around. If I keep it in one place I can still shift fine but when it rotates, it won't shift...
  3. NG900 & OG9-3 Workshop
    ok so hopefully i can describe this as best as i can... so the saab that i am working on had to have the clutch replaced. i locked the transmission into 4th gear as the directions on platonoff said. i then dropped the transmission and did all the proper steps to replace the clutch. upon...
  4. Parts for Sale/Wanted - North America
    Up for sale is a manual shift linkage from my '95 900 SE. The linkage bushing on the trans blew out and I went ahead and did the "upgrade" to the '97 and up linkage. Anyway, there's no going back now to the old one for me (you have to cut the bushing lug off the trans to mount the newer one)...
  5. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Has anyone installed the GS shifter reinforcement kit on a 4 cyl? I was watching the video of the install on the GS website, and it looks like the shift cable should pop off real easily, but I was prying on mine hard and it didn't seem to want to budge. Does anyone have any tips or experience?
  6. NG900 & OG9-3 Workshop
    Hey everybody, I recently changed the clutch on my 96 Saab 900. I used a lot of the information provided on this forum to get it done. I should add that I have the upgraded shifter linkage as well. The problem that I have is that I cannot get the shifter inside the car to go into gear; I also...
  7. Parts for Sale/Wanted - North America
    hey i have a 1994 900 se with the old style shift linkage and i want upgrade to the newer style ng900/og93 linkage. Pm me or email me @ [email protected] with your price and pixs, Thanks
  8. Parts for Sale/Wanted - North America
    Hello All, I need a shifter assembly for a 96 Saab 900s turbo with 5 spd. I understand Saab upgraded in 97, and the car actually has it. Unfortunately, it is broken. The car is being sold and so even the 95-96 version in good shape would be acceptable. You can email me at leec[email protected]
1-8 of 8 Results
Top