SaabCentral Forums banner
saab
1-20 of 500 Results
Advanced
  1. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I recenly got a 2006 saab 9-3 2.0T and I wondering if it would be worth putting a second turbo in it?
  2. Parts for Sale/Wanted - North America
    Ok so, here's my problem. My whole driver seat, track, harness, and motor is FUBAR. I've been trying to find a replacement Aero seat, and turning up with nothing. Does anyone have one, for a 2004-2011 model 9-3? I heard the ARC seat is the same style with the bolstering. DM me please if you know...
  3. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hello, this is my first post on SaabCentral. I am looking for a first car under $1900 and I found a 08 9-3 sportcombi with near 200k miles on it. It has a misfire and a pretty bad shake, engine code leads to ionization module, but the owner thinks it need new coils. It is also leaking oil, which...
  4. Tech II Workshop
    Alright, mannnn this has been such a hassle but thank you guys for all the help so far ! If its not one thing its another... okay so here's the issue I am having now. I was finally able to get my tech 2 to connect with my car, it some how just froze up one of the times I plugged it in so I had...
  5. Tech II Workshop
    Hello, I am in need of much help from the saab gods and quick! Okay so here's the story. I went and purchased a dell latitude D820 just for this, it is running microsoft XP as needed. I have a tech2 with an install disk, I was able to install software but then resulted in E666, because there...
  6. Engine Oil, Lubricants & Fluids
    I have a saab 9-5 1999 can I put midgrade fuel in it or should I go higher or lower
  7. Cars for Sale - UK & Europe
    Saab 93 Vector Convertible 1.9 TID Auto 88k miles Laser Red, full grey leather interior. Selling as non runner - it started to make a loud noise from engine now won’t start. Ideal for project to repair or for parts. Car is in mint condition for year it’s a shame to sell but no time to fix or...
  8. NG900 & OG9-3 Workshop
    So I’ve got a 2002 9-3 with just under 200k miles on it. I’ve been plagued with problems since I got it, clutch blew out my second day of ownership and then the sludge problem surfaced. My SAAB mech told me all about the sludge problem, then to put dropping the pan and cleaning the screen out...
  9. Cars Wanted - North America
    Hello all, My first car was a 1997 Saab 900 Talladega convertible and since my biggest regret has been selling it before college and now that I’m at finished with school I want to get back into a Saab. If you have or know of anyone selling any year 9-5 wagon with a manual or any year C900 turbo...
  10. 9-5 Workshop
    First time one this forum need help with a problem I'm having with my 95 2006 with 156000 miles Car is throwing code p0733 and p0735 (Incorrect ratio )it's also throwing p0501(Vehicle Speed Sensor Range/Performance) Tanny drove fine on all gears before the CEL&Tranny light came on then it...
  11. Parts for Sale/Wanted - North America
    RARE!! Set of 4 OEM SAAB 17" BBS RK2 RK511 Wheels Rims set. These were refinished with recently. 1 wheel has a hairline crack in the face not the barrel and does not affect performance or structure (see pic). Reasonable offers only!! Name: Dwayne Price: $1200obo Contact: PM Location: MD
  12. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    so this just happened to my key fob. the parts aboveare what comprised of the unlock button and seems like the whole thing came off. im wondering if id be able to solder the piece back and if it would even be functional. i am however prepared to buy a new fob with chip in it. i came across some...
  13. 9-5 Workshop
    I’m talking about the line that goes from the check valve on the fuel pump to the fuel filter. Was trying to replace the check valve and barely managed to make it happen using a union and some extra hose. Not satisfied with it and want to replace the whole thing. Below is the line for the 9-3...
  14. Tech II Workshop
    Hi everyone I have a 2007 saab 93 aero 2.8T I bought with a bad ecu my problem is I purchased a good ecu and when I go to program it with tech 2 it reads no communication to ecm I replaced it with the old one and I'm getting the same message
  15. Parts for Sale/Wanted - North America
    Must be in decent condition, free from rips, tears and excessive wear.
  16. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I have a 2005 Saab 93 2.0T. When I press on the gas white smoke comes out. Starts up right away. Turbo is good. I had a code P0300 like 4 days ago but it went away. No check engine light. Even with scanning it.
  17. Parts for Sale/Wanted - North America
    I currently own a 2006 Saab 9-3 Aero and it needs some work done to the front end. I’m in need of the aero front bumper with headlight washers, both front fender liners, and a washer resovior. Does anyone, preferably on the east coast USA, have a parts saab with the parts i need? Thanks!
  18. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I've wanted to add a couple gauge pods to my Saabs for a while, but it's no secret Saabs don't have a ton of aftermarket support, as compared to other brands/cars, and you can't really find much. So I decided to CAD model and render an initial version of an OEM-fit gauge pod I plan on printing...
  19. Parts for Sale/Wanted - North America
    I have a 1986 Saab 900 Turbo and I’m on the hunt for the rear window louvres. If you have some or know anyone who may, let me know and we’ll set something up. Thank you!
1-20 of 500 Results
Top