SaabCentral Forums banner

replace

  1. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    today i hit a patch of black ice in a parking lot going about 10kph and hit a concrete retainer. my 2003 9-3 linear sustained minimal damage as you can see in the attached image: but never the less the bumper needs to be replaced. I'm assuming that this is something I could do on my own, minus...
  2. NG900 & OG9-3 Workshop
    They also say it's going to cost about $500, and I wanted to make sure that doesn't sound fishy to you folks. I drive a 2001 9-3 named Nancy. I've jumped her battery three times today, then got it replaced just a little while ago because I can't keep driving and jumping like that! The mechanic...
  3. 9-5 Workshop
    I have a 2005 Saab 9-5 ARC. I was recently driving and hit a rolling hubcap coming from the other direction. I am thankful that the damage seems pretty minor given I hit it at 55 MPH. I did however lose part of my front spoiler strip. It seems to be a clean break on the front drivers side...
  4. 9-5 Workshop
    I have an automatic 2.3t eco 1999 9-5, I had been thinking my turbo was going out so I pulled my exhaust manafold off to get into the turbo to check the shaft for play and found none, but found white powder all in the inside? Any ideas? White smoke sometimes on start up, smoke from under hood...
  5. NG900 & OG9-3 Workshop
    I have a 1996 900 SE convertible and was wondering if anybody knew how to replace the old massve antenna with a newer much shorter one. If anyone has any ideas let me know.
  6. NG900 & OG9-3 Workshop
    I have a 96 900 SE convertible and I was wondering if anybody knew how to replace the current massive antenna with a shorter anenna. If anyone has any ideas let me know.
  7. NG900 & OG9-3 Workshop
    I have a 1996 900 SE turbo and my drive belt broke off while I was driving the other day so I need to replace it. If anyone knows how to replace the belt or if I even can by myself or if I need to take it to a shop let me know. Thanks.
  8. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Ok.....here goes the guide on how to replace your faulty wiper motor and wiper motor transmission assembly. time taken about an hour while taking many pictures, fooling around and with 0 experience. for someone with experience and no digital camera to make pauses around 20minutes. tools...
  9. NG900 & OG9-3 Workshop
    Hi Saab People, While changing the clutch on my 1997 900SE recently I noticed that the drivers-side inner CV joint was loose - when I grabbed it with my hand, it would move a bit. So much that it was leaking a bit of transmission oil! I poked around on thesaabsite.com, and discovered that...
  10. C900 Workshop
    My 1992 Saab 900 shifter stick/rod broke off from the ball that it seems to have been welded to. The wire/thin rod that attaches to the reverse ring also broke. My plan is to re-weld it, or pick one up from a junk yard. In order to re-weld I would need to replace the wire, but I cannot figure...
Top