SaabCentral Forums banner
repair
1-20 of 54 Results
  1. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hello all, Recently, I had a power steering leak fixed with new parts. Unfortunately, there was some power steering fluid mixed with oil that had managed to seep into cylinder 2, as I assume it was not a tight enough seal, causing fluid to slowly accumulate around the spark plug and the top of...
  2. Auto Detailing & Body Repairs
    Watched "The Saab Magic Man" on YouTube. He knows his stuff and is much more advanced and patient than I'll ever be. Mine is about a 6.5 out of 10. Rough, worn, some seams separating, and a couple small holes. I don't need to get it back to showroom condition. I keep seeing ads for stuff like...
  3. NG900 & OG9-3 Workshop
    Since picking this up a few weeks ago I'm finding more nicks and dings... a few smaller ones than I originally noticed upon buying. The 2 biggest ones are: 1. Slight impact on left front corner. Bumper gouged and chrome strip cracked. Reglued poorly. I cleaned it up and reglued it better. Might...
  4. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I have a 2006 Saab 9-3 Aero 2.8L V6 with the 6 speed automatic transmission and i need to either have the abs module remanufactured or replaced. Does anyone have anybody to recommend me to?
  5. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hi there, I seem to have a leak from the underside of my 2007 Saab, near the front right wheel. Could anyone help with identifying the wet part and what the issue may be please? Thanks a lot!
  6. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I've been doing some work on our 2004 saab 9-3 2.0t and trying to get it back to daily driver condition. Just a little background on this particular car: The check engine came on and my obd scan tool shows the following codes: P0638 - Throttle control actuator Control Range/ Performance Bank...
  7. 9-5 Workshop
    I hope I'm not breaking a rule here, this is my first post on a car forum, and I need some help. My car is, as the title says, 2003 9-5, Turbo wagon, trying to replace the CPS and NSS to hopefully keep it from dying on my parents every time they drive anywhere in town. Found the CPS but can't...
  8. Parts for Sale/Wanted - North America
    Hello All! Up for sale is a Genuine Saab Transmission Repair Kit (SAAB Part# 5440516) Fits: 900 (94-98) / 9000 (94-98) / 9-3 (99-02) / 9-5 (99-09) I bought this new from Maptun back in April of 2020. The repair shop wanted $1300 to install it, so I said to hell with it and bought a new...
  9. 9000 Workshop
    I have a 1998 saab 9000 cse. Things been my baby for 3 years. But now it's my project car, sold it to my uncle when I went to basic training. But bought it back from him so it wouldn't go to the scrapper. The gauge cluster seems to be shot. The temp gauge and the fuel gauge seems like it's...
  10. 9-5 Workshop
    Hey everybody, hope everybody's doing well, as always my 2008 9-5 is so low key that I don't need to be here! That was the case until Sunday, when I was rear ended on the first day of snow here in MN. I'm hoping you guys might have an opinion one way or another on what I should do. Here's the...
  11. NG900 & OG9-3 Workshop
    Hello! I'm new to this near site, so apologies in advance if I'm doing this wrong. I just bought this 1996 900SE from someone who had it sitting for about 9 months, and I'm currently looking for some advice on the worst parts, being the top, and the rear struts. Roof- Previous owner noticed roof...
  12. Cars for Sale - North America
    Hello All, I am new to SaabCentral. I wanted to post my 1991 Saab C900S (Classic) Convertible here, as I am selling it for parts/repair. It's a 5-speed manual car with the 2.1L N/A I4 gas engine. The odometer currently reads 144,702 original miles. It is finished in what I believe is known as...
  13. C900 Workshop
    In the rebuild of my front-end bingled 2.1 sedan, I've now got to to the point where most of the re-assembly is done, and I'm fitting a spare set of headlights salvaged from another slope-front c900. I found one of the lights (the RHS one) has a broken adjuster. I note that Bill from Saabits...
  14. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I looked up videos and looked on websites but I could never find where it was at or what it was near. Mines needs replaced, that’s why I’m looking for where it’s at/ how to replace it. I have a 2003 9-3 Sedan
  15. Cars for Sale - North America
    Name: Jack McGarry Location - additional details: Reading, PA Means of contact: email or call 6107811199 Price: make offer Transmission Type (auto/manual): auto Mileage (miles/kms): 149600 Description: Car sustained damage to front left bumper and hood in accident. I drove it home for...
  16. C900 Workshop
    I recently just bought a 96 Saab 900 s hatchback the sunroof chain has to be replaced and the headliner is completely falling. Any tips on how to fix these?
  17. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I heard a loud snap as I sat down. I get out and the seat comes up w/ me. I look under the seat and find this (pics). Any help is appreciated on how I should fix this thing. Junk yard new seat? LMK, thanks. A bit about me, I've put on my own suspension and change oil in this car, put in HID...
  18. Audio, Video, Navigation & Security
    I was looking to possibly hook up an aux to my car or possibly a bluetooth system or possibly a navigation system I dont know yet. Right now I just have the radio and cd player. Im not too crazy about all the buttons it has. Is there a upgraded look to what I have? Open to options at this...
  19. NG900 & OG9-3 Workshop
    Hi first off I'd like to say I'm newish to the forums. More importantly I need some information please. I'm going to be purchasing a 2000 viggen this comming week. The mechanicals are very strong even with 194k (comes with a hefty folder of maintenance papers) though the body isn't the best. It...
  20. Auto Detailing & Body Repairs
    I have a bumper that I want to cut in half and marry it to another version of it, creating a custom bumper. I need a way to combine the two plastic bumper halves into one and then finish and paint it. I was thinking a flexible epoxy/ fiberglass combo along the split between the two bumpers, with...
1-20 of 54 Results
Top