Search Results for ‘regulator’

So about a month after I got my saab, I noticed the front passenger window would stick at first when rolling down and have some resistance part way through, but would make it down with no issues. Lately however, if I try to roll it down, it starts sticking about half way, then pops, and won't...

Hey folks, I have anti pinch equipped in my 08 but the driver's door never rolls up automatically, only down. When I do anything with the Tech2, I get a reminder that the Driver's door hasn't been reset but no amount of calibration or fiddling with it gets it going. I have a spare driver's...

Hello all, I have an '05 Saab 9-3t 2.0 that is giving me problems with the heating system. First of all the fan won't turn off so I have to remove the 40 amp fuse so my battery doesn't die overnight. Secondly I have heat coming out of the defrost vent near the windshield even with the fan OFF...

OK...so originally bought 03 9-3 SE Turbo Convertible just about 2wks ago and have been slowly tackling few issues. Main cosmetic/functional issue was that neither quarter window was functional and after investigating found both had been disconnected. Plugged 'em both in and both window motors...

Hello everyone! I'm pretty new to this forum and I have a question regarding my power windows. So recently my friend helped me out with a problem I've been having with my driver's side rear window, we found out that the cable assembly was broken and so we pulled out the entire window regulator...

I'm not sure if I'm in the right thread, but I am having problems with my Saab window and the R headlight, and both fog lights. My right low beam keeps failing, it's done it three times but this time it's completely out. The wires on the housing are exposed and I wiggle it around and it won't...

I have a 2003 9-3 Vector, its driver side window doesn't work, but all the other three do. I got a new regulator and power window switch pack. Does anyone know if there is a way to manually lower the window/regulator to put it in the service position so it can be replaced? The switch...

I am trying to remove the regulator for the rear-side (not back) window on a 1999 9-3 convertible. I have the regulator and glass loose but there si not enough room to slide the assembly out. Is there a trick?

The wire in my regulator snapped and I am in need of a new window regulator and motor. I know that it does not have anti pinch and the motor is 2 pin. I have been looking high and low to find a place to get a replacement but I cannot seem to find one. Does anyone have any links I can follow to...

I have a pair of motors and regulators for a Saab 900 Convertible, 1994-1998. Asking $200 plus shipping for the set, but willing to separate if nobody wants both sets. I'm located in Portland, Oregon I bought these as spares for our 1999 9-3 and they didn't fit, but it was too late to return...

No longer For Sale; Was able to return it.

Last week I found that the positive battery connector of my 2001 93 SE full of oxidation and corrosion. Even I found drops of liquid which I think was acid. Before to replace the battery I want to be sure if it is the responsible or is the alternator voltage regulator which overcharging...

Thanks for putting up with my poor rendition of Arnold and Total Recal...but I could really use some help where to go next. Car: 2003 Saab 9-3 Linear 2.0 Problem: No blower motor operation What I have done thus far: Checked and reseated the 40amp fuse on the side of the dash panel Dug in...

I just bought my first SAAB. The rear drivers side door window would not stay up so I pulled the panel to find that a small white plastic piece that runs up and down the track had broken. Can I buy and replace just this piece or do I have to buy an entire replacement regulator?

Hey guys. I just got done bypassing my 1996 Saab 900S's NSS and now my drivers side rear window has fallen slightly into the door, and I hear a crack and it sounds like a piece has fallen off the assembly inside. :cry: My question to you: How can I jam my window or force it to remain shut...