SaabCentral Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. 9000 Workshop
    Hi good ladies and gentlemen! First post here. So I have 1995 9000 Aero, which I love. A couple of months ago, I started to see problems going WOT, where the clutch would be slipping a lot unless I applied only gentle force on the throttle. Clutch hadn't been changed in 5 years or so, I thought...
  2. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I'm replacing the rear pads (only) on my 2004 9-3 Aero convertible. I have read the step by step instructions at: Thank you very much BTW. Problem: I removed the dust covers from the 17mm Guide Bolts on the Hydraulic Body, but there is a...
  3. NG900 & OG9-3 Workshop
    Its time for me to do the rear rotors and finally fix the seized parking brake which has never worked during the time I've had the car. I've done the pads before but never have had the rotors/calipers off, or messed with the parking brake. For the parking brake I'm assuming its an...
  4. 9-5 Workshop
    done my brakes over the weekend , its a 2001 so had solid rear disks so upgraded to the newer vented ones but the calipers i got are duff , my mot is out so need done asap but the local parts supplier cant find vented calipers for saab 9-5 but can find ones for the 9-3 , anyone know if these...
  5. 9-5 Workshop
    So i got replacement pads for the rear at autozone...wrong ones. i tried looking online with my specific vin, it ends in x3037022, but i couldnt find any that fit. please help. thanks
  6. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I need to change my rear brakes and rotors on my '06 aero. Can anyone point me to a DIY thread?
1-6 of 6 Results