SaabCentral Forums banner

radio 900

  1. NG900 & OG9-3 Workshop
    If you have the correct radio code but you’re still having problems coding in, try this: Turn car to on. Enter code. Leave car in on position don't start engine. Go to fuse panel inside car. Pull out fuse no.13 for radio diagnostic. Pop fuse back in & radio comes back to life. Sorted...
  2. NG900 & OG9-3 Workshop
    I have a '95 900 S convertible project with just 52,500 miles, but with a few gremlins. The SID is completely dead, including the clock & Black Panel buttons. Nothing functions. However, the buttons & clock light do light up when the car's lights are on - but it takes a few minutes for it to...
  3. NG900 & OG9-3 Workshop
    Hi there, the radio in my 1997 900 SE Turbo Convertible has a funky problem with the radio. Everything works fine with the radio except the volume control. When I turn on the radio (push the button), it plays whatever station it's on with a medium sound level. When I try and turn the volume up...
  4. C900 Workshop
    Hi there, the radio in my 1997 900 SE Turbo Convertible has a funky problem with the radio. Everything works fine with the radio except the volume control. When I turn on the radio (push the button), it plays whatever station it's on with a medium sound level. When I try and turn the volume up...
  5. C900 Workshop
    I just replaced the power antenna mast (just the mast, not the motor) on our '84 900 Sedan with an aftermarket replacement I picked up on eBay. The replacement works great but, when it's fully retracted with the radio off, the top of the antenna sits about 3/4" inside the antenna tube (below...
  6. C900 Workshop
    Just bought the car. 1992 SAAB 900s with original clarion deck. I replaced the 5A fuse was blown, with a new one. Now the radio powers up and displays 4235. I tried the reset procedure, leaving the car at ACC for 1 hour and came outside, however it did not say code. I tried pressing and holding...
Top