SaabCentral Forums banner

pedal

  1. Gas pedal stiff when pushed halfway

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hi all! I've been using this forum a lot to work on my 2004 9-3 since i bought it last year but there's one problem i have not been able to find an answer for anywhere. For the past few months, I've noticed that my gas pedal becomes much stiffer when i press it about halfway. It presses easily...
  2. Experience with Stabilant 22? Help needed

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hi all, Elsewhere on this forum, I am asking for help on a re-occurring p2138 error code on my 2006 Saab 9-3 Convertible. The pedal sensor issue that is linked to this code has thus far not been dealt with. The pedal sensor has been replaced numerous of times, but didn't do the job. In result...
  3. Photos: Which wires go from pedal sensor into throttle body?

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hi everyone, In another thread I ask for help on a returning error code (P2138) indicating a pedal sensor issue. Pedal sensor is replaced multiple times (by dealer & other shops), but the error code keeps returning (almost always when I turn the car on, or when I brake/hit a bump). This thread...
  4. Error P2138 - Help needed: gas pedal sensor replaced 3 times!

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hi all, About a year ago my 2006 Saab 9-3 convertible started jumping into limp mode. Reading the error code with an OBDII I found the error code P2138. This code suggest that there is something wrong with the gas pedal sensor. As I have no experience with doing any repairs myself, I dropped...
  5. Brake Pedal continuously flat on first try

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    For the longest time the brake pedal on my ARC has been really flat compared to the other cars I have. I recently had to change the rear rotors and pads so why not do a complete fluid flush with Pentosin DOT4 while I had the wheels off. I've had the car for a little over a year so I didn't...
  6. 2003 Vector-Spongy Brakes

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hey everybody! I would appreciate any help with the following problem. I have an 03 vector that we bought at an insurance auction. We did an engine swap and replaced pads and rotors. We bled the system (not using the correct pattern) and soft brakes occurred. We put in a new master cylinder and...
Top