SaabCentral Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. 9-5 Workshop
    I bought a 21341200 crankcase ventilation kit but can't figure out which hoses go where. Looks like I am missing at least one hose. Thanks.
  2. C900 Workshop
    Well, valve cover is on.... but cracked my PCV nose at the crankcase, and then broke it trying to get it off the intake as well. In hindsight I should have just tried to fix it at the crankcase nipple by rigging something with hose. :nono; Regardless - I now need to replace this hose, found...
  3. 9-5 Workshop
    I recently bought a Saab 9-5 Wagon, 2001, base model. It has low miles, 1 previous owner, and was mostly dealer serviced. I thought I was getting quite a good vehicle based on this, but the more I work my way around the car the more I am troubled (especially now that I know about the sludgeing...
  4. 9-5 Workshop
    I have a 99 9-5 wagon 2.3L turbo. It overheated on me so I pulled over and I saw a leak on a small heater hose that was steaming out the coolant. I cut of the end that was bad and re fitted the same hose for a temp. fix. I filled it up and tried to drive it home. that's when I heard a pop...
  5. 9-5 Workshop
    OK-I got all the stuff and did the upgrade. I found that I couldn't reach plastic box very easily at all. Hence, I just jammed the hose that comes off the turbo pipe on there. Hose seemed to fit and I got it nearly all the way on. Good to go? How necessary to change out that box?
1-5 of 5 Results