SaabCentral Forums banner
parts
1-20 of 145 Results
Advanced
  1. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hello all, I am looking into replacing my rear knuckle bushings with some powerflex ones. Currently the symptoms I have are a clanking, particularly from the rear right when going over bumps, and an occasional rattle at lower speeds (under 60mph mostly) that entirely stops once I even slightly...
  2. NG900 & OG9-3 Workshop
    I bought a parts car today. I won't re-hash my Saab story (see past posts), but long story short, I bought a nice one a couple months ago, and recently, a beat up '95 900SE 2.0T, 5-speed vert popped up close by on CL. (Mine's a '97.) 88k miles. (Mine's got 137k.) Asking $1900. (Paid $3k for...
  3. C900 Performance, Mods & Tuning
    Recently resurrected my wrecked 88 turbo - using a 93 n/a car I found a state over. A torch and some determination later and the Frankensaab is born. I plan on stripping out the rest of the 93 for goodies like the better FPR, the 5 speed for later, etc. My question is what else is really -...
  4. Parts for Sale/Wanted - North America
    I have a 2003 9-3 Linear that runs and drives but has electrical issues that I don't have the time to dive into. As of right now it's a complete car and I'm offering any part to anyone who wants it for a fair price. The clock spring, rear calipers, passenger front fender, and (I think) the ECU...
  5. NG900 & OG9-3 Performance, Mods & Tuning
    At long last I am finally going to ask for help. I bought my Viggen last fall, and I love the car to death but it has its share of problems. It has a stage 3 JZW tune, good for about 350 horse, idk though I haven’t dyno tested it and I bought it with the tune on it. JZW has apparently fell off...
  6. Parts for Sale/Wanted - North America
    I currently own a 2006 Saab 9-3 Aero and it needs some work done to the front end. I’m in need of the aero front bumper with headlight washers, both front fender liners, and a washer resovior. Does anyone, preferably on the east coast USA, have a parts saab with the parts i need? Thanks!
  7. Parts for Sale/Wanted - North America
    Car was a 2001 convertible odometer read 130,xxx. Bought the car for the nose and parting out the rest. It was in a minor rear end collision. Car was pretty stripped when we scrapped the chassis and some things have sold that I’m probably forgetting so just comment/ send pm with parts needed zip...
  8. NG900 & OG9-3 Workshop
    I work for an advance auto parts in Denver. I needed a pair of the screws, there were only supposed to be 2 in the system. I ordered both. The boxes came with 10 in one, and 8 in the other. Should have been 1 per.....so now if you need any for the ng900/early 9-3. Advance has...
  9. NG900 & OG9-3 Workshop
    Hey guys, I'm gonna need to replace a lot of parts in my 2001 9-3 Viggen that are either not made or are super expensive. I'm just wondering if anyone can point me towards compatible or generic parts for the following systems (or all the systems): hoses for the oil cooling system (a.k.a. the...
  10. Cars for Sale - North America
    Hello All, I am new to SaabCentral. I wanted to post my 1991 Saab C900S (Classic) Convertible here, as I am selling it for parts/repair. It's a 5-speed manual car with the 2.1L N/A I4 gas engine. The odometer currently reads 144,702 original miles. It is finished in what I believe is known as...
  11. Parts for Sale/Wanted - North America
    A treasure chest of Original Equipment Manufacturer (OEM) parts for several SAAB vehicles in the North Hills of Pittsburgh: + 2001 red SAAB 9-5 Aero for sale in separate listing I’ve been a SAAB lover and backyard mechanic for years, but it’s time for me to downsize and spend less time in...
  12. C900 Workshop
    Way back when I was asking about where to find the Saab EPC that I could download and install on my PC. Sadly I had to completely delete and re-install Windows 10 recently because the system was too corrupted to repair, and that meant that the EPC I'd downloaded a few years ago also went away...
  13. C900 Projects
    Hello I have a 1989 900 parts car and it has a lot of good stuff on it. It only had a hit on the right front corner so the hood has some damage but let me know if you want anything. My email is [email protected] I’ll ship anything and take off anything for pretty cheap. It has a glass...
  14. Parts for Sale/Wanted - North America
    Hey everyone, there are a lot of Saabs in the junkyards near me and I know it's difficult to find parts for our cars sometimes. If you see anything that you're interested in tell me and I can go take a look for you and get you photos. I also have a set of HID headlight assemblies for sale from...
  15. Parts for Sale/Wanted - North America
    Car was hit on the drivers side, suspension, interior good, no airbag deployment.
  16. Cars for Sale - North America
    Name: Jack McGarry Location - additional details: Reading, PA Means of contact: email or call 6107811199 Price: make offer Transmission Type (auto/manual): auto Mileage (miles/kms): 149600 Description: Car sustained damage to front left bumper and hood in accident. I drove it home for...
  17. NG900 & OG9-3 Workshop
    If there is already a thread for this then I apologize but I tried searching and found nothing. I think it would be nice to have a thread for all of the parts from other vehicles that are known to fit on our cars. I know some of the 9-5 stuff is interchangeable but have not heard of anything...
  18. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Im looking at the WIS and im just not sure about what they mean when it says "5-fit the guide bearings"?? Are those the caps or something else?? Just wanting to confirm if its 7ft lbs or 16ft lbs ?? Also need to replace one of the cam cap bolts, I found this part which seems to be right...
  19. C900 Workshop
    In shopping for valves for a head rebuild, I find, for example, that EEuroParts offers three variants: SAAB Intake Valve - Genuine SAAB 30546916, made in UK, $18.24 ea SAAB Intake Valve - TRW 10535500, made in Deutschland, $08.49 ea SAAB Intake Valve - Intervalves 9165580, made in Thailand...
  20. 99 & 90 Workshop
    Hi. Does anyone know if there is an EPC / Parts Catalogue list for, say, a 1976 99 GL?
1-20 of 145 Results
Top