SaabCentral Forums banner
1-11 of 11 Results
  1. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I recently purchased the BSR Stage 1 upgrade software and PPC for my U.S. Spec 2006 9-3SS 2.0T (F35 gearbox with Quaife). I uploaded the BSR software to my car and synched the PPC with BSR with no issues whatsoever. The problem is that this upgrade has had no noticeable effect on the...
  2. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    hi guys, i'm kind of new still i went around the forum a few time and had the trionic suite but now i lost it and also i'm looking to get usb cable to be able to do tuning if any one could help me since all the cable i've been onto so far where just replica only good for diagnostic and...
  3. 9-5 Workshop
    I've been looking at Rostra and a few others that offer these. Such as: The problem I have with the ones I've found is that they want to hook into pins 6, 14 on the OBD2 sensor for Can-H and Can-L which our cars don't seem to...
  4. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hi everyone, This might be a silly question. I need to clear a Californian smog check, but I have continuously problems with a P2138 error code (check the threads here). As a consequence, I need to clear the fault codes frequently because the car goes to Limp Home Mode. Doing so, I also clear...
  5. NG900 & OG9-3 Workshop
    I have scanned my Saab 9-3 2000 with a few apps using a bluetooth OBD2 reader and can't get any error codes, it works for revs etc but can't read codes, am I missing something? Torque is good, just just loads when I scan for codes, does it take a long time, has anyone else had success?
  6. 9-5 Workshop
    Hi all, I went to emissions test today and failed because they said there was no voltage at the obd connector and it didn't communicate. But I was able to plug my own handheld obd scan tool and it was working fine. So I couldn't really understand the reason why they didn't get any voltage...
  7. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    The pictures attached are my morning drive to school and my afternoon drive home. The pictures are screenshots (2 pics for each data sheet cause they got cut off). The pictures with the closed loop and 731 rpms are the morning drive. The pictures with open loop and 915 rpms are the afternoon...
  8. NG900 & OG9-3 Workshop
    Hi. I have just bought a 1997 900S convertible. It's great, but I can't get the OBD2 reader to connect to the port under the steering wheel ( the reader works fine). Is the OBD2 port fused? Does anyone else have this problem or have suggestions about what's wrong? Cheers John
  9. NG900 & OG9-3 Workshop
    Ok, so I decided to hook up an OBD2 reader to my car to see if any codes were present, after reading it displays "U3LLL" and that's all. I deleted the codes and read again, same code reads in. I've searched on Google with 0 results, and the forums have zero results.. just my luck. What is...
  10. NG900 & OG9-3 Workshop
    2001 9-3CV: The airbag warning light came on as I was driving the other day. Fuse is OK, and connecting it to a professional OBD2 reader reveals no codes. Anyone have this problem or experience in fixing it? Any help would be appreciated. Regards, Ben
  11. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hi everyone, I am reading this forum for months and finally I wanted to ask my questions directly rather than searching for answers :) First, I want to improve my interior in much more technological fashion by adding secondary touch screen to the empty space where we put our things, in front...
1-11 of 11 Results