SaabCentral Forums banner

obd

  1. NG900 OBD-II Location

    NG900 & OG9-3 Workshop
    Just need a confirmation. NG900 94-98 has OBD-II connector under the steering wheel, and not the Saab OBD-I (usually under the passenger seat). Apart from the OBD implement in 96, ALL NG900's should have the OBD-II connector. Please confirm. ;ol; Thank you.
  2. 1995 900s - OBD1 or 2?

    NG900 & OG9-3 Workshop
    Howdy yall - Does my 1995 900s have an OBD1 or OBD2 code port under the steering wheel? I think its OBD1... either way it isn't working and I need it inspected like yesterday... any tips/info would rock. I saw a few threads about chkng the pins and/or replacing the port. Not sure I could...
  3. Saab 2004 93 AERO OBD Pinout

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hello, Just wondering if anyone has the correct pinout for a 2004 93 AERO OBD connector. One of my wires has come loose and I need the correct position. Thanks!
  4. OBD II Code P0305

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hi Everyone- First I'd like to say thanks in advance for any help you may offer. I just registered for an account on this site because I have run out of answers that I can find on my own. I should mention that I was able to find out a ton of information on this site, but I have yet to fix the...
  5. What comm. protocol (& HW) to use for a pre-OBDII Saab?

    9000 Workshop
    Hi guys, I asked a question in a 9-5 section: http://www.saabcentral.com/forums/showthread.php?p=2374802 As you can see I've received a reply that says that my 9-5 should communicate the same way 9000s do. So, my questions for you: - do some 9000 have the same setup? (i.e. with the D-shaped...
  6. ELM327: What comm. protocol to use on an european pre-OBD '98 9-5 V6?

    9-5 Workshop
    Hey guys, I have a WiFi ELM327 module. On OBDII-compliant cars it works like a charm. I just telnet to it and send commands... With my Saab, no go: NO DATA, since it's a pre-2001 EU car. My question is: is it possible to use this device to communicate with a pre-OBD Saab 9-5? (MY98 V6 Griffin...
  7. Tech 2

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hi I am not sure if this is the right place to post this. But here it goes. I am looking at getting a tech 2 clone. I have done a lot of research about this and getting mixed views about them. It seems to be all about what site and supplier you get them from. Has any one got one or had one? If...
  8. DEQ says no power to OBD-II Port, can't get reading. Help!

    9-5 Workshop
    Hello Saabers, I have an odd DEQ issue that has me stumped. I've tried searching and can't find any answers. I'm trying to run an 04 9-5 Aero through DEQ. The car has 99K miles, with no CEL's. It runs great and idles smooth. It passed Oregon DEQ in 2008 and 2010 with no problems. The problem...
  9. 900s OBD Type

    NG900 & OG9-3 Workshop
    Hi, I recently purchased an OBD2 cable for another car of mine which works perfectly. I also wanted to diagnose why my Check Engine Light was on my Saab too. However whenever I try to plug in the connector my laptop can never find it. I make sure that the settings are correct on my laptop and...
  10. OBD Emissions Fail

    NG900 & OG9-3 Workshop
    I have a 2001 93 that just failed emissions ;oops: and I have the codes that caused the failure. About 2 yrs ago I replace the original engine with an Ecopower 2.0 Turbo. I've been looking up the codes online as I want to attempt to fix these gremlins myself, the codes are as follows: P0455...
  11. OBD Emissions Fail

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I have a 2001 93 that just failed emissions ;oops: and I have the codes that caused the failure. About 2 yrs ago I replace the original engine with an Ecopower 2.0 Turbo. I've been looking up the codes online as I want to attempt to fix these gremlins myself, the codes are as follows: P0455...
  12. No OBD communications

    9-5 Workshop
    My daughter gave me her 1999 Saab 9-5 SE automatic. I took it to the NJ inspection station this week and it failed for "No OBD communications". I took it by my independent mechanic and he tried his scanner with no joy. Being a compulsive DIY-er, I removed the 16 pin D-type OBD connector...
  13. Bought an OBD II scanner, need help to understand it :)

    9-5 Workshop
    Hello Saab fans. Last week I've become a Saab owner: 9-5, 2.3t, v4, manual, 1999, green silver, has 132K miles :) Besides that I cannot find 93 octane here, in Des Moines, I've got a problem and perhaps someone could help me. Basically I have the well known CEL on. It goes off only when the...
Top