SaabCentral Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-10 of 10 Results
  1. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I have a '03 9-3 Linear 2.0t Automatic and I just noticed my engine moves in the fwd/back direction when shifting between park/drive/reverse or when I rev it in gear. Some people say its the engine mounts and my mechanic says torque mounts. Has anyone had this happen before? What is the most...
  2. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hey Saab Central, I just recently ordered Sachs struts and springs, I was wondering if I can purchase different mounts and bearing other than the Sachs brand. There are moog, European parts, and KYB as well. Would it make a difference in which brand I would buy. :confused:
  3. C900 Workshop
    I recently purchased a set of fog lights to replace the old broken ones on my 1993 900S. The mounts were severely bent. I removed the grill to gain access to the bolts attaching the mounts to the back of the bumper. I removed the bolts from the right side mount with no problem. But when I...
  4. 9-5 Workshop
    Good Morning Everyone, I purchased a 2003 9-5 Aero about 2 weeks ago. The previous owner had done some damage to the back end, so he sold it to me for next to nothing. My intent was to do some work on it and have a decent car to run errands in that gets better mileage than my truck. I took...
  5. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    just want to check if anyone has had polyflex inserts done for the front and rear torque mounts. i am having these inserts done and car is vibrating badly. though it has settled after two weeks, but still it's not normal. any advice? cheerios...i
  6. NG900 & OG9-3 Workshop
    I know there's about 100 threads on engine mounts but I cant seem to find any solid help on removing/replacing the passenger side mount on my 2000 9-3 I've replaced the drivers side and the lower mounts but the passenger side is much harder to access. i have the part coming in the mail has...
  7. NG900 & OG9-3 Workshop
    Hey there everyone im having issues with my 2000 9-3. Whenever I hit a bump or even just turn hard or hit the gas I can hear big nocks coming from the left and right ide of the engine bay and from the research ive done it sounds like a mount issue. ive looked on some forums but cant seem to find...
  8. NG900 & OG9-3 Workshop
    I noticed sometimes the tranny sticks from 4th to 5th gear. Would that be a transmission mount issue?
  9. NG900 & OG9-3 Performance, Mods & Tuning
    Hello everyone, So here is the deal, I have a 1999 9-3SE that seems to have acquired a vibrating thumping noise in the lower rpms. In gears 3rd, 4th, and especially 5th it sounds like there is a low thumping noise when i accelerate. It gets worse when i shift a little on the earlier side round...
  10. C900 Workshop
    Hello everybody from Berlin; I want to replace all the three hydraulic engine mounts of my 92' 900 Turbo but I'm having troubles finding the good ones. For example: In parts for Saab cost the original ones almost 200 GBP (231 Eur), and the Scantech ones the fifth parts, that's 43 GBP. I want...
1-10 of 10 Results