SaabCentral Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Good Morning Experts. I have a 2010 9-3 Aero 2.0 with roughly 130k. The car was running great but had a minor miss fire at idle. I check the plugs, they looked a little old and I replaced them with the same Autolite double plat. that were in the car, and set the gap at 1mm. At...
  2. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    the car is running rough at idle, only code given was a P0300. I have eliminated spark, fuel, and compression as the cause of the issue by using the activation feature on my tech 2 scan tool. cylinder 1 has a short on the coil when I pull it off, but it seems to be firing fine otherwise. all...
  3. C900 Workshop
    So my 1993 900s 16v seems to have a mind of it own. firstly i started noticing a hard starting problem but i figured it just needed a tune up. so i started replacing things, i replaced the plugs, cap and rotor, mass airflow meter throttle position sensor and coolant temperature sensor. now its...
  4. NG900 & OG9-3 Workshop
    I have a saab 9-3 2.2tid with 40k on it. i get an engine light coming on when i accelerate hard up hill. i took it to saab and they came back with the error code p0314 which is the random miss fire code. but the car has no miss fire!! when i took it to a specialist they seemed to think the...
1-4 of 4 Results
Top