SaabCentral Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hi all, Doing some mods and upgrades to the wagon. I recently slung on a set of H&R -40 mm springs and new front top mounts, bearings and drop links. I've also just filled the arches with 19's running 235/35's. What do you think ?
  2. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I have a 2003 9-3 Vector, its driver side window doesn't work, but all the other three do. I got a new regulator and power window switch pack. Does anyone know if there is a way to manually lower the window/regulator to put it in the service position so it can be replaced? The switch...
  3. NG900 & OG9-3 Workshop
    I thought I should share this with someone. A few weeks ago I picked up a 99 9-3 convertible pretty cheap. The top didn't go down and it supposedly was diagnosed as needing a new pump. I had been researching and found a manual way to close the top in "emergency situations". It is detailed in...
  4. NG900 & OG9-3 Workshop
    I have a very nice, clean 2000 saab 93 turbo. I love everything about the car....Except for the ride height. i would love to lower it to the point where it is an inch off of the ground but i dont want to hurt the body. However, i still want to lower it as low as i safely can. my budget is just...
  5. C900 Workshop
    If any of you remember from one of my previous threads in April, my beautiful '84 900 8V Turbo was totaled from the front by a pickup truck. Dad and I are on an emotionally-charged mission to get the frame fixed and bring the car back to life. We've removed the engine, and removing the ball...
  6. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I know that these questions have been asked and answered 100 times already but I can't find anything with the search function at all. Is there a good secret search feature on this sight? I can't find anything. When you do a BSR tune how does it increase power? Does it control boost via the...
  7. 9-5 Workshop
    Is there any other size engine besides the OEM engine. Something cheaper than 1k? Thats the cheapest I can find and I dont want to sell my saab. It has a Spun Crankshaft Baring and a broken piston rod. Would only another saab engine work or would a engine from a different car work? thanks ray
  8. C900 Workshop
    Pulling out of a parking lot (luckily not going more than 5MPH) I heard a very large snap. After attempting to drive not a few feet I realized I wasn't going anywhere. I jacked her up and saw to my despair a very broken metal beam, I later learned to be the lower controller arm. The mechanic I...
1-8 of 8 Results
Top