SaabCentral Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. 9-5 Workshop
    Hi everyone, I have a 2001 9-5 and my lower control arm front rear bushings are quite worn out. I researched and could not find a clear answer whether driving with worn control arm bushings might cause any serious hazard. As far as I can find it might cause little sloppiness in steering, uneven...
  2. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I need to replace the bushings on the lower control arms in my rear suspension. This is not the rear bushing on the front control arms. I have replacement upper control arms already and just noticed that the sub-frame end bushing and the wheel hub end bushings on the lower control arms are...
  3. NG900 & OG9-3 Workshop
    I'm changing my struts, outer tie rod ends and renewing the ball joint boot covers on my 1998 900-S 2.3L SAAB today and I saw my passenger side ball joint housing on the lower control arm looked like this when I took the torn boot off: You can see the dents in it at 9 and 6 o'clock. There's...
1-3 of 3 Results
Top