SaabCentral Forums banner

lights

  1. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I got a set of the Euro spec (no orange reflector) blue tint xenon lights for my 08 Aero. My original lights included Xenon and adaptive lights so they have the module for it, the new euro ones have xenon but no AFL. Is it possible to retrofit this without tearing the lenses apart? I have seen...
  2. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I've replaced bulbs on the 03-07 models and if they're xenon, they're D2S and I have found philips/osram replacements on ebay before that weren't crazy expensive however I'm not so sure about the 08+. They're D1S but does anyone know where I can get reputable bulbs that aren't some weird color?
  3. New Member Introductions
    Hi all, Long-time lurker, first-time poster. My beloved Sun Green OG93 finally died (RIP to a modern classic :cry:) but I'm now the proud owner of a 2008 (57 plate) 9-3 Vector 1.8t! It's a whole new world. It had its first test the night I bought it - driving my parents to the airport in at...
  4. 9-5 Workshop
    Hi, everyone, I have recently changed the lock on the tailgate of my 9-5 Aero MY 2002, and the new (second hand) lock works fine, but since i've changed it the lights which should illuminate when the tailgate isoprene do not work. Is there a simple fix or something i can try, or should i just...
  5. NG900 & OG9-3 Workshop
    My daytime running lights have just recently gone out. I see that they did that about a week ago, and then all of a sudden they came back on. And now they are off again. The yellow corner lights are still on, and my high beams do work. I am not sure what would cause this to happen. I checked the...
  6. 9-5 Workshop
    Remove This Thread!
  7. 9000 Performance, Mods & Tuning
    I recently aqcuired 9000CDE in much better shape than previous 9000CD so I will renovate the CDE and use CD as an organ donor. One of the things I want to renovate are lights. Saabs 9000 had always bad lights even new from factory and after 20 years is it terrible, I really see almsot nothing...
  8. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hey all! I've been wanting to fix this, and have been trying but ive almost given up, so i need help from the community ! I keep getting DTC's Front and right Parking light and side marker circuits are Open. However my turn signals and side markers work. I even turned on the hazards and all...
  9. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Where in the crap do you find new tail lights? None of the parts stores around me have tail lights for my 08 9-3. I ordered some LED ones from CARiD and they were not right, as I suspected might happen, even though they said they would fit my car. So where? Or did I just get the wrong ones from...
  10. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Took on a small project this morning to replace a bulb behind the MCC on my 2005 9-3. It's pretty simple really, but sometimes pics are helpful so I thought I'd share the process. If you're taking this on I'll assume you've got the MCC removed already, but if not there is a great tutorial...
  11. 9-5 Workshop
    Ok have an 04 9-5 having a problem with the driver side lights. Tail light, not brake lot goes in and out, DRL only on driver side won't work, hi beam flickers. Have put a volt meter on DRL prong, with no light reads 11.8v,under load (with light bulb) reads less then 3V. Also driver side I...
  12. NG900 & OG9-3 Workshop
    My 99 saab 9-3 is doing something really weird when I come to a hard brake or sharp turn & sometimes when I'm crusing at a good speed and just taking curvy roads, the fluid light will come on briefly and the ! indicator. I assumed it was my Brakes/brake pad/break fluid ect. but I took it in to...
  13. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I've had to my 93 going on 3 years now. When I first got the car it had the original setup of the headlights always coming on as the DRL's with the switch not doing anything except dash lights. This past summer I found someone an hour away with a Tech 2 willing to change it to the European...
  14. C900 Performance, Mods & Tuning
    Hello, I'm looking to add a couple of aftermarket parts to my 1988 saab 900 turbo, however I don't have enough time to research so I was hoping you guys could provide the sites! Here's what I'm looking for: -on some saabs I see the turn indicator light lens are clear and on mine they are...
  15. C900 Workshop
    Hi, I am really new to the saab community, simply because it's my first car. I don't like how the headlights aren't bright enough, and a trending thing to do in the prerunner and offroad jeep and truck scenes are aluminum led flood/spot light combo bars. I really like the bars and I plan on...
  16. NG900 & OG9-3 Workshop
    Hey everyone, First off, I've got a 1997 NG900SE Turbo just so you all are aware. I've known for awhile that my driver side fog light lens had been cracked (probably for years), but just now got around to replacing the unit. Before starting, I didn't bother to see if my fog lights still worked...
  17. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    So, I recently bought 55w 6k HIDS for my 03 Linear Saab 9-3. Prior to that ive already had 35w 6k, but i wanted to get brighter results so i upgraded. Problem is that once i turn the car on they flicker and turn off. So after doing a bit of re search i found out i might need a harness. so i...
  18. Parts for Sale/Wanted - North America
    Name: Jared Location - additional details: PA Means of contact: PM Price: Description: My 2007 2.0T doesn't have fog lights. To install I need the lights, harness and switch. If anyone has one or all from a part out, spare or whatever let me know with price you want. Thanks!
  19. NG900 & OG9-3 Workshop
    I do not know if they are related but instrument panel lights come on when i turn on the key but go out after a few seconds. Also it asks me to test break light. I tap the break and the request goes away. The instrument cluster lights do not come on during night driving. Almost like i'm running...
  20. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    So I just got the interior kit from LEDGlow, and I have got power to 'em from the driver side fuse. My question is, what is the easiest/most direct way to run a cord from the driver side footwell to the passenger one? I'm trying to make the install as clean as possible. Thanks!
Top