SaabCentral Forums banner
injector
1-4 of 4 Results
  1. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    2003 93 linear. One day coming off a stop sign, as I shifted into second (was just driving normally) the engine started to bog suddenly and blowing white smoke. engine was idling very rough and was very difficult to start. I had flashing CEL and a cylinder 1 misfire code and 3 pending codes for...
  2. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hi all, I'm nearly stuck on my search for the cause of a mystery misfire in cylinder 1 of my 2007 Saab 9-3 Aero 2.8L Manual... My BlueDriver code reader is spitting out P0201 and P0301, and after replacing the cylinder 1 coil and plug, all the injectors, and performing countless tests, I have...
  3. 9000 Workshop
    Hello, i have a 97 Saab 9000 2.0 Turbo that suddenly shut down under driving. I Have checked all wiring in the engine bay and wiring to the relay/fusebox. The engine runs when spraying starting fluid in the throttle body. Everything seems fine except that it has no injector pulse at the...
  4. NG900 & OG9-3 Workshop
    Hello all, While changing the o-rings on the nozzle end of my injectors, one of the discs that would be between the intake and o-ring broke off/shot across the shop. I was wondering what this disc does, and if I can machine a replacement? Since I am a machinist, I can get pretty close...
1-4 of 4 Results
Top