Search Results for ‘icm’

My interior dash lights flickered, then the yellow engine warning light came on, I got the battery tested, it’s fine. Diagnostic came back: Power Train System, engine misfire. It says I need to replace the ECU. Looking at these parts costing $200-600 at Saab, want to make sure I have the right...

First off, this is my first ever post on the forums so please forgive any lack of knowledge or etiquette I may have the ICM 2 in my 2003 93 linear kicked the bucket a few days ago, it still barely works and the car is able to run fine, so it’s not 100% toast yet I’m wondering if I can pick up...

I looked up videos and looked on websites but I could never find where it was at or what it was near. Mines needs replaced, that’s why I’m looking for where it’s at/ how to replace it. I have a 2003 9-3 Sedan

New Saab owner here! With some (great) difficulty, I've just finished installing an Android head unit, new amp and speakers in my partner's 9-3 convertible. I'm hoping to get the existing steering wheel controls working with the new head unit, but given how tightly-integrated the EHU, ICM and...

My husband wanted a new radio for his Saab. A friend said he could do it but he took out the ICM and cut the wires... long story short 'friend' disappeared when the car wouldn't start. We have put all wires back together, checked all fuses, replaced the battery and the car will still not start...

Hey folks. So I'm helping a guy with an 05 9-3 convertible. The fuse in the dash panel, #14 to be exact, Is sparking when the ICM is hooked up. I've also noticed that the fiber lines don't light up. I took a look at the diagram and learned that the radio amp and the ICM both touch that same...

Hi All, This Saab is beating me up bad this week. I am nearly $1000 in to this so far and still having issues. :cry: Hope someone out there can help me out. This is a 2005 Saab 9-3 Linear My issues are that when the key is removed... The steering wheel lock does not engage The radio's power...

For starters let me just say that I know if you remove the ICM1 that my vehicle will not start. Does this just have to do with the 2 fiber connection on the back of the ICM1? If so, does anyone know of a way to possibly create a loopback between the 2 to allow startup and install of my...

Hi guys, I wish to share with you my problem. I am new around here and I hope this is the right thread for my questions. Here it goes: the previous owner of my 2005 9-3 SS (1.9 D, 110KW) had a kind of CD-changer installed. The device is called Dension Gateway 500. Before he sold the car he...

Hey guys, I have a working ICM2 unit for sale... ready to be married to your car. It only includes the unit (not the control panel), it is plug and play with your control panel, so you can save some money from buying the whole unit if your ICM2 is having issues. $70 shipped. ;ol;