SaabCentral Forums banner
help please
1-5 of 5 Results
  1. NG900 & OG9-3 Workshop
    The rattle is coming from rear of engine next to transmission closest to the cabin. I took off the oil cap and could hear it loudly though the fill tube. And it gets worse as engine heats up, no metal shavings on the dipstick and I just did an oil change and I couldn't see any metal there either...
  2. Audio, Video, Navigation & Security
    I'm trying to install an ipad in my saab 9-3 2008 with the navigation system. I took the unit out but i can't find how to remove/take the front part of (the display and buttons). I need to remove it to fit the ipad over it. Do I need to take the whole unit apart or is there another easier...
  3. NG900 & OG9-3 Workshop
    First time saab owner. Okay so a few days ago i ended up buying a saab 9-3 SE with a manual transmission from craigslist. Car has around 160 miles. Everything was fine except for the fact that the reverse was all gone. He had the car sitting for about 2 months due to the fact that the guy had...
  4. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I'm getting a intermitted check engine light, I'm trying to avoid unnecessary part replacements and costly diagnostics as I'm out of work currently. Any helpful information is much appreciated, Here's a little info on the car: I just got this car in December and until about a month ago I've had...
  5. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I have a 2003 saab 9-3 and recently I've ran into almost every ignition problem... I don't want to order a new ISM, and I'm up for a new project. Is there anyway I could wire everything through toggle switches?.. Like the starter, fuel pump, and stuff like that?.. I don't mean the inside of the...
1-5 of 5 Results
Top