SaabCentral Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-10 of 10 Results
  1. NG900 & OG9-3 Workshop
    I have a bad vibration while accelerating, more weight in the vehicle makes it worse it seems that vibration frequency speeds up as I get faster, stops completely after letting off gas, it is really bad while turning left, also while accelerating 50-60mph, replaced both CVs with brand new cvs...
  2. NG900 & OG9-3 Workshop
    The rattle is coming from rear of engine next to transmission closest to the cabin. I took off the oil cap and could hear it loudly though the fill tube. And it gets worse as engine heats up, no metal shavings on the dipstick and I just did an oil change and I couldn't see any metal there either...
  3. 9-5 Performance, Mods & Tuning
    Is there any performance torque converter for 95 aero 4-speed auto? My gearbox can handle only 400nm and I need it to handle more power. Problem is that I cant find any performance torque converter for my 4-speed auto on the internet, I don't want to make custom because it will be probably very...
  4. 9-5 Workshop
    So I just got my 2003 Saab 9-5 2.3t Linear back on the road after a blown turbo, which is weird because that never happens to Saabs. Now what concerns me is not the James Bond like cloud of smoke because I know it had oil in the exhaust and its starting to abate now as its burning off. The...
  5. 9-5 Workshop
    I am trying to change the blend door arm in my motor for the AC on the driver side. In the motor just the white arm part broke off but the metal shaft is still there intact. I bought a replacement which arrived as the arm and shaft connected as one.I removed the vent over the motor exposing the...
  6. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hello I am new in this forum and I am because of several certain unpleasant events during the night where the alarm has been activated for absolutely no reason at all. And it goes off all night long if I don't lock the car traditionally, not activating the car alarm. First night it went off at...
  7. NG900 & OG9-3 Workshop
    I know there's about 100 threads on engine mounts but I cant seem to find any solid help on removing/replacing the passenger side mount on my 2000 9-3 I've replaced the drivers side and the lower mounts but the passenger side is much harder to access. i have the part coming in the mail has...
  8. 9-5 Workshop
    So one day this winter I went to start my 2004 9-5 Arc and it would not turn over! The battery was strong the starter was fine and I had new plugs in there. Being the winter I put some in some dry gas (it was extremely cold!!, just in-case). A guy that I knew used to work on Saabs suggested that...
  9. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hi, I have a saab that has been a bit of a wallet hog. Last week I did the first repair on the engine, all it was, was a vacuum valve repair. I had it fixed then drove the 1100 miles back home. This morning I got in the car and turned it on and noticed a clunking sound, so I checked the oil and...
  10. NG900 & OG9-3 Workshop
    i have got my car put back together but it is reving up from 2000 to 3000 and back down. i am thinking this is goin to be timing slightly off. any sugestions?
1-10 of 10 Results
Top