SaabCentral Forums banner

heat shield

  1. Metallic rattling noise from under the car

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hi guys. recently a rattling noise has happened that comes from underneath the car. It happened after i went over a small curb at a slow speed you can hear it slightly when u rev the car a bit when its cold but not when its warm The noise can be heard when driving down the road at lower speeds...
  2. Is my heat shield lose?

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    is this heat shield loose? is it meant to have this much play? not sure if this caused a metallic rattling or grinding type of sound Please watch video of the play. /watch?v=YGKfhcIdx7U please copy that half link and put it infront of youtube . c0m
  3. Wanted: 1989 900 Turbo Parts Wanted!

    Parts for Sale/Wanted - North America
    Name:Alan Location: San Francisco Means of contact: [email protected] I'm looking for the following: Description: 9349804 - heat shield 9103102 - link with bushing (need 2) 9103524 - 15 spoke alloy 15x5.5 (not bent/damaged)
  4. CPS Question

    NG900 & OG9-3 Workshop
    I plan on swapping out my CPS even though my car has shown no symptoms of a failing CPS. It has almost 125,000 miles and more than likely still has the stock part. I went out to go put some wd40 on it to help loosen it up cause i've heard this is a tough torx screw to get to. Anyways I noticed...
  5. Fixing Rattling Heat Shields

    9-5 Workshop
    My exhaust heat shield came loose about a month ago. I considered removing it, but my friend, a Subaru mechanic, suggested tacking it back into place with some self-tapping screws. I did this yesterday, with 4 1/4 cutting-ended screws. Just screwed them right up into the carriage. After doing...
Top