SaabCentral Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. C900 Workshop
    So been doing a little testing of my fuel system in my 92. 900 sx and my AIC valve is the two pin kind. According to the Bentley manual this is the kind used in LH2.4 but I figured my car was running 2.4.2 which should have a 3 pin ACI. Is it possible one of the the many P.O s swapped it for...
  2. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    recently i picked up a td04-14t for my 04 9-3 LINEAR(2.0t), i planned to to go with the siemens deka 60# but ended up finding a 07 9-3 2.0T in the junk yard and snagged the injectors off of that. I swapped the injectors off of the junk car on to my linears fuel rail, but came to realize these...
  3. NG900 & OG9-3 Workshop
    Ok, so recently I bought a new gas cap and it killed my car... Earlier today (before new gas cap) a coworker pointed out that my gas cap was leaking air. I have always noticed the hissing coming from behind the fuel door and never thought anything about it, so I never did anything about it...
  4. C900 Workshop
    Hi All, looking to clean the AMM on my 2.1 n/a C900 and removed the screws that hold it to the intake/throttle body and its stuck on there. Is it ok to pull the sensor off the intake for cleaning, it seems like its connected with some sealant which Im not sure if it is ok to break....:confused:
  5. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hi All I am a new member to this forum and in real need of some advice. My saab 93 had been to 2 separate garages for the same issue and every time there is a different answer and no cure to my problems. [The Car] SAAB 93 TID 2006 (on a 2007 chassis according to SAAB) Z19DT engine 8 valve...
  6. NG900 & OG9-3 Workshop
    Hi All I am a new member to this forum and in real need of some advice. My saab 93 had been to 2 separate garages for the same issue and every time there is a different answer and no cure to my problems. [The Car] SAAB 93 TID 2006 (on a 2007 chassis according to SAAB) Z19DT engine 8 valve...
  7. 9000 Workshop
    My 1997 9000 CSE turbo has been a great starting and running car for the 8 years I've owned it. 1/11 on a very cold winter day it didn't start. The mechanic said it needed a battery and then a fuel pump. Got it done but, there was a lingering smell of fuel in the cabin. 4/11 the ignition tumbler...
1-8 of 8 Results
Top