SaabCentral Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. NG900 & OG9-3 Workshop
    I'm having some real trouble trying to get my blower fan working. I suspected the fan was completely broken, so firstly I measured the power coming from the connector that sits in the resistor. It showed 12 volts, so I decided to try and supply 12 volts straight to the fan cables and it worked...
  2. C900 Workshop
    Issue started after I replaced my battery the other day. I managed to electrocute myself with the positive cable while the negative was attached to the battery. I know, it was a mistake. Total competence relapse. Since then, my fans are not coming on. Both of them aren't. I try to force the A/C...
  3. NG900 & OG9-3 Workshop
    Please can someone help me. My ACC fan speed is oscillating, the dash display shows speed on low in auto sensor, but the motor is oscillating high and low. This past summer I had to adjust the AC manually because the auto sensor didn't seem to work, but AC worked fine. After I noticed when I...
  4. NG900 & OG9-3 Workshop
    Alright I can't seem to find a solid answer on this . I have a 2000 9-3 and need to replace the blower resistor. Is it behind the glove box or is it under the windshield wiper housing thing? Thanks in advance
  5. 9-5 Workshop
    Looking for the location of the fan speed resistor. Any help is appreciated.:D
1-5 of 5 Results
Top