SaabCentral Forums banner

exhaust manifold

  1. Wanted: B-engine turbo exhaust manifold 99T/900T

    Parts for Sale/Wanted - North America
    Looking for an exhaust manifold for b-engine turbo (1978 99 Turbo or 1979-1980 900 Turbo) in excellent/uncracked condition. Later version preferred but let me know what you have. Thanks
  2. Drilled through head into oil passage

    9000 Workshop
    When removing a broken upper exhaust manifold stud from the B234 head on my 1994 9000, I think I continued drilling through the stud and into an oil passage. Now that stud has a slow oil leak. I'm going to take some time to find a replacement head, clean it up nice and put it on when I have the...
  3. Burning Oil From Exhaust Manifold

    NG900 & OG9-3 Workshop
    I have a 2000 Saab 9-3 Base and the engine is burning oil as I idle the car and it seems to be coming from the exhaust manifold. I checked the valve cover gaskets and replaced them and there is no oil coming from there. I have the distributor plug wiped clean before starting the car and it's not...
  4. Tubular exhaust manifold

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    i am gunning for a bigger turbo and my objectives are to achieve motor outcomes of 450-500 hp. without going into the depth of other mods needed, am seeking a change of exhaust mani to compliment a bigger turbo with a T03/04 flange. given the tight space between the firewall and the motor...
  5. Check Engine Light Codes

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hi everyone, I bought a 99 Saab 2.0 L Turbo Convertible on the 11th! Love the look of the thing, and I think I got a good deal on it, but several issues showed up shortly after driving it home... One of the (many) problems is that the CEL turned on, I pulled the following codes: P0130...
  6. Back from my hiatus....

    C900 Workshop
    ...been waiting for a while, for my money to be right mainly, so I can finish the '88 SPG. (Must be complete by 7/22/12) Updates: -Got pinion, carrier an inner driver bearings replaced and all tolerances in the '88 box set by Patterson Performance. -Got some + ordered some bearings for the...
  7. Exhaust Manifold Stud Question

    NG900 & OG9-3 Workshop
    My 2000 9-3 started sounding like a tractor earlier this week... Upon inspection I have lost 2 exhaust manifold studs :confused: I was able to find a locally sources exhaust manifold gasket, and I should be able to remove the broken studs (found some nice write-ups in the archives on that)...
  8. For Sale: Tubular Equal length headers for NA 8v c900

    Parts for Sale/Wanted - North America
    Tubular and equal length headers built by a company called MMS. My brother had them on his '81 for two years. The rust is not as bad as it looks. It's just surface rust, the metal is still very solid. The pipe could be cleaned up pretty easy. c900 non-turbo 8v 100$ + shipping at buyers...
  9. front exhaust pipes into exhaust manifold

    C900 Workshop
    Howdy there Saabers! I have an '88 900S, 16v non-turbo. She sounds like a motorcycle - looks like the gaskets between the front exhaust pipes and the exhaust manifold are old and cracked. I can feel exhaust leaking out while she's running. It looks to me that I can take out the four bolts...
  10. Exhaust bolt torque spec?

    9-5 Workshop
    After removing 3 broken exhaust manifold studs on my '99 9-5, Does anyone have the correct tightening spec?
  11. So there I was....

    NG900 & OG9-3 Workshop
    So i've been on here asking about my saab before, to see if anyone could give me hints, I had a couple of issues that I thought were related, turns out, they were both seperate problems. One of which I fixed, which was a small short under the center console by the ignition lock cylinder. My...
Top