SaabCentral Forums banner

distributor

  1. Distributor help!!

    C900 Workshop
    Hi yall, I bought a 81 saab 900 turbo. It was't gettting a spark. I checked all the wires and kind of gave up and sent it to a saab spacific mechanic. He says that the enire distributor is bad... and that he cant find a replacement because a replacement distributor has got to be from a 1981...
  2. Distributor CE 93/94 0237507010 - Red Box

    C900 Workshop
    Hi, i am looking for replacement/repair of 900 CE (red box) distributors. The part that is actually broken is the diaphragm in the vac/advance capsule. This is the part that makes the difference between a 008 and a 010 distributor. The rod in the capsule is # 2973. Part# for the capsule Bosch 1...
  3. C900i Distributor

    C900 Workshop
    Hi, I'm trying to find a C900i distributor with the Hall Effect sensor in the distributor body. Trouble is, I don't know which models had that type of distributor. Can anyone help me identify the models I should be approaching with a spanner? Cheers John
  4. Distributor/Hall Sensor Low Voltage

    C900 Workshop
    Hello everyone, my 1985 T16 rewire saga continues. I ripped all of the wiring out and replaced all of the bad stuff with good new TXL wiring. I wasn't getting too excited towards the end, and good thing I didn't because the car still won't start. The fuel pump relay does not click when the key...
  5. Replacing distributor on 900s

    NG900 & OG9-3 Workshop
    So I decided to swap my leaky distributor with a replacement one. I marked the position of the rotor before pulling it out and proceeding to install the new one. From what i understand it is important that the new rotor head be in the same position as the old. However, this rotor doesn`t have...
  6. 1980 900T Fuel Distributor Line

    C900 Workshop
    Ok, while removing my manifold to begin the task of replacing the water pump, I noticed the line from the Fuel Distributor that runs underneath the manifold had been sandwiched and cracked. So, I must reach out to those far smarter than I am for some ideas on a suitable replacement/fix. Below...
  7. Wanted: Distributor

    Parts for Sale/Wanted - North America
    Does anyone have a distributor for a 1989 Saab 900 turbo preferably with the square hall sensor connection?
  8. my 92 saab 900s will not turn over!!

    C900 Workshop
    i just replaced the distributor cap and rotor as well in my saab, i was told that was the reason it was stalling out everytime i drove it.. car will not turn over and it turns but even cuts out while trying to start it.. what do you think is the issue? How can i solve this problem? :x
  9. Testing the Hall Sensor

    C900 Workshop
    Hi, Is there anything special I need to be aware of, when I check the signal from the Hall Sensor on a 16V n/a 2 litre engine? Last week, my daughter's c900 "died" while it was idling in a parking-space. I ran a few tests on it, as recommended by the Bentley Bible, and found no signal from the...
Top