SaabCentral Forums banner
cps
1-19 of 54 Results
  1. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    2003 9-3 Linear here. I've been having this issue for a few weeks now with it being rather intermittent and random, but at some points when I go to start the car, the engine with crank and crank but no start. I don't have any CEL/MILs, so I'm at a bit of a loss as to what would cause this...
  2. NG900 & OG9-3 Workshop
    Morning all, I drive a 2000 9-3. Yesterday while on the highway I started getting a jerking motion as I would accelerate like power would come and go. Right before I broke down I lost my rear light and the blinkers stopped working. As I pulled into my parking space the car stalled out...
  3. 9-5 Workshop
    Hi everyone! Yesterday I bought my first Saab, a Saab 9-5 2.0t from 2006 (facelift). When I bought it yesterday everything worked as it should. But today I took the car on a long journey, around 300km (185mi). When I got home from the journey, I waited for around 1 hour before I was gonna drive...
  4. 9-5 Workshop
    I have a 2002 9-5 Aero wagon with 97,000 mi. For the last few of weeks I've been experiencing an intermittent no start. The engine will still turn over and the battery is strong. There are no check engine lights. At first I thought it was DIC related. Being a good Saab owner, I carry a spare in...
  5. 9-5 Workshop
    Hi everyone, Car shut off while driving multiple times on my way home. Both times I replaced the DIC on the side of the road with two spares I had and was able to make it the rest of the way. Since then it's had trouble starting. Will crank but won't start. Tried replacing CPS, spark plugs...
  6. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Got a weird issue going on. And after 2 days of working on it I'm turning to Saab Central once again. Prior to this issue the car had the following CEL codes: P0301 P0245 (Turbo Wastegate Solenoid A low) P0201 (injector circuit/open cyl 1) P0442 (existing since forever ago) Car was running...
  7. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Had my 2006 9-3 estate with the 2.8t V6 (auto) for about two weeks now and had no major issues so far (apart from a bit of coolant escaping but was topped back up) On Sunday afternoon I drove less than a mile when the car started to judder quite violently at low rpm then just died, after...
  8. Parts for Sale/Wanted - North America
    Hi: I'm looking to buy the bracket that holds the two O2 sensors and the CPS sensor wiring connectors on the 2002 and on 9-5. It mounts near the thermostat housing. My car is missing this part and the connectors are just loose in the engine bay. I can't find a part number for this thing...
  9. NG900 & OG9-3 Workshop
    Hi forum, i am sure that this topic has been discussed a lot but i couldn't find any useful information about my situation: I use EasyDiag for diagnose on my car and i get this error: P1345-A camshaft pump sensor The symptoms: the car suddenly begun to stall and after a few more startups, it...
  10. NG900 & OG9-3 Workshop
    Okay do i washed my engine bay with a hose and degreased it i then let the car dry and drive it into the garage. I then removed the dic and painted it. Went to drive the car and it kind of splutters every now and then but wont actually run. Cps reads 530 ohms at resting twmp which is about 8...
  11. 9-5 Workshop
    Hello everyone, Hope you can help me, Ive been searching everywhere but can't find right answer, so I'm really asking for your help as I love this car and would love to drive it back asap! So here's my problem with my 1999 9-5. Car cranks well, but doesn't fire. It started happening last week...
  12. 9-5 Workshop
    Hello everyone, Hope you can help me, Ive been searching everywhere but can't find right answer, so I'm really asking for your help as I love this car and would love to drive it back asap! So here's my problem with my 1999 9-5. Car cranks well, but doesn't fire. It started happening last week...
  13. NG900 & OG9-3 Workshop
    Hi, i'm in spain, and my saab cut out. An english mechanic has looked at it, and said its the CPS. He ordered one, it came, and he said its the wrong one, this happened twice now, 2 weeks in. I have looked everywhere online to get the CPS, and he instructed me that its a 4 pin connector, the...
    cps
  14. NG900 & OG9-3 Workshop
    You'd think that replacing a tiny sensor shouldn't cause too much trouble, but it's been my problem-child for several weeks now. This is on a '96 900S convertible, N/A 2.3L. The car was having a problem where it'd buck violently while driving, and then stall when I opened the clutch. It...
  15. 9-5 Workshop
    Hello good folks, happy spring and all. Getting things out to start some car-related work and my local Saab colleague and fellow aficionado who I'll call LandyKisnut and I are thinking about few projects. However, one of us has a tough nut to crack and I'm hoping one of you might have an idea...
  16. 9-5 Workshop
    Hi guys: Few days ago I was driving for 10 min. on the hwy and suddenly the car lost power and few seconds later the engine shut off. I parked aside and tried several times to start the engine (the engine starts over). After several tries the engine started normal so I drove home. Next morning...
  17. C900 Workshop
    below is the email I sent to a local Saab Mechanic in the portland area, I was wondering if anyone else has had this problem or knew of any fixes? or if the one offered was correct. Thus far i have not found a CPS or turbo distributor anywhere Hello! My name is Jarrod, I am an owner of 1991...
  18. NG900 & OG9-3 Workshop
    I've got a '99 9-3 which is experiencing a sudden and random loss of engine power. I've been trying to debug it myself over these last few weeks, but after having to abandon a road trip home to Canada for Christmas while still in WY I realised I need help! Symptoms: Engine appears to lose...
  19. 9-5 Workshop
    Hi every one, this time it looks like CPS has gone bad, and Car is not starting at all, I actually had new sensor ordered few months ago, but since than I am not able to change it my self, I tried many times to open the old one, and bought couple of tools, but no success, so I need some help...
1-19 of 54 Results
Top