SaabCentral Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. C900 Workshop
    I want to remove and clean the throttle body on my 1988 900S, and I need some direction on how to disconnect the throttle cable from the TB so I don't have fiddle with the current settings when re-installing it. I'd appreciate it if someone could give this noob some directions. THANKS!
  2. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hi All, I think I royally messed up something during a Throttle/MAP sensor cleaning. I followed this thread here in cleaning the throttle/MAP: Afterwards, I took it around the block for a test drive with no problems. But the moment I...
  3. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Both were dirty, the throttle body especially so. Grabbed a can of Wynn's Throttle Body & Carb Cleaner ... ripped the throttle body off (took just 5 minutes, expected it to take longer!) and covered it. The crap/gunk just fell away; it's good stuff. You need a 10mm socket & a flat-head...
1-3 of 3 Results