canbus

CANUSB Lawicel adapter USB PID updated to the latest version (Win 8, 10 compatible) 120 Ohm termination resistor installed USB BDM adapter T7 ECU with BDM ribbon + T7 connector with CAN serial connector 12VDC 1.25A power supply Located in Toronto, Canada $200USD + shipping I can add 3.5bar FPR...

I've searched and searched the forum and can't find an answer. Will pulling the fuse labeled "Bulb Test" on my 2007 9-5 Aero eliminate bulb out messages for LED bulbs? Will pulling that fuse also stop the LEDs from blinking while the car is off, which I've heard is common? Thanks in advance for...

I'm gong to be hooking up a reverse camera, and the instructions state: "If canbus do not connect up the trigger wire to the reverse light positive. Instead, the canbus will send a command to the radio when the car is in reverse." I looked at aeronaut's thread here...

Howdy folks! With the awesome help of Seth over at http://bluesaab.blogspot.com/ I'm working on adapting his aux in / ipod arduino module into my 2004 9-5 Wagon with the Prestige audio system. A bit of context: the module is a custom arduino / canbus board that ties into the CD changer...

If you have seen my other post, you will see I have a clutch problem. Well, a day after having this looked at, my Check Engine light came on...bad luck eh? It drives fine so wouldn't have noticed without seeing the light. I took it to a local garage and they said the scan showed one fault. They...