SaabCentral Forums banner

bushings

  1. 9-5 Workshop
    The bushings in the front subframe of my 2002 9-5 Aero wagon were dead. A lot of guys on the forums talk about just replacing the back two (2). But I decided I'd do the job right so I ordered replacement parts of all six (6) bushings. I ordered the parts off eSaabParts.com (a good parts...
  2. 9-5 Performance, Mods & Tuning
    Howdy everyone, hope you're all having a great day! So I've been struggling to find any replacement to the crappy plastic shifter bushings which have plagued our cars from the factory. I've seen that Eeuro used to sell an aluminum alternative but they seemed to have ceased selling them for...
  3. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hi there, Saab 9-3 2.8 v6 Aero 2006 sedan New to all this (sort of-I only come here when I need advice on the car and you guys are always fantastic), so I'm sorry if I'm posting incorrectly. Car is continuing to squeak as I turn corners and suspension just feels 'off'. Additionally, a sort...
  4. 9-5 Workshop
    I am in need of a suspension overhaul on my 2003 9-5 Aero. I am going to upgrade struts and bushings. As this is my first time doing suspension I want to hear some tips and suggestions. For the struts, I am thinking about doing the Bilstein B12 Pro Kit, but my car already scrapes on my '04-'05...
  5. 9-5 Workshop
    My 2003 9-5 Aero has 177,000 miles, (got her at 125,000 in 2013). I get some 'rumbling' from the back end and a 'grinding hum' from left front - could it be a wheel bearing? I have these replacement parts: 1) Shocks, 2) Struts, 3) Front Wheel Hubs, 4) New Rotors & Pads (front & back), 5) New...
  6. 9-5 Workshop
    I recently bought a 2001 9-5 estate, when I first got the car home I noticed that when I back out and turn the wheel to the right it makes a popping noise just before it maxes out. I asked a buddy of mine who works at a dealership if he had an idea and he said without taking a look it was most...
  7. 9-5 Workshop
    Just bought a 2003 9-5 Aero sedan w/ about 116k on the odo. Really nice car with a few issues, but the price was right. I took it to a Saab specialist shop before the sale to get it checked out, and they quoted me some prices that seem kind of crazy, but then again, I don't know the ins and...
  8. 9-5 Workshop
    Among other things, I'm looking at a new set of tires over the summer. Since I'm about to park the car for a couple of weeks to do some work on it, I'm thinking about replacing the tie rod ends. I've seen several opinions on the best ones, but I can't remember what they are (something from user...
  9. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I have a slight pull in my 93 a convertible to the right and I know it needs to be aligned. However I am also in need of some new suspension bushings in the front and rear because there's some squeaks and pops. Should I get the aligned now or should I wait until after I do the suspension work...
  10. NG900 & OG9-3 Workshop
    I just bought these shifter bushings for my '00 9-3 SE, to tighten up the shifter. I have done quite a bit of DIY with my car, so I figured I could do it. But I can't find anywhere online or on the car where these things go! Do they go on the actual shifter in the console, and I have to tear the...
  11. Parts for Sale/Wanted - North America
    I'm looking to overhaul my suspension for my 1997 SAAB 9000 CS. This is just a daily driver, so I'm just looking to refresh the worn components to restore the original driving characteristics. I have shocks & struts on the way. I'm looking for new rubber or polyurethane suspension bushings. Or...
  12. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I'm thoroughly confused! Today I noticed a creak/squeak when I'm at low speeds on my 08 9-3 with 85K. The noise is apparent at low speeds (sometimes not even going over any large bumps), so when i got home tonight, i pushed on the passenger left front side, and voila, there's the noise. You...
  13. 9-5 Workshop
    Please tell me all bushings needed after lowering a 2002 aero. Koni fsd , Jamex springs.. I am having major tire wear, lumping like a roller coaster, and outer edge eat... I noticed front control arm bushing is shot, So, I figured on just getting all bushings change, problem is I dont know what...
  14. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    After 3 months of being fed up with the awkward, vague and notchy stock shifter, I decided it was time for a change. After researching the both GS Short Shift Kit and the TWM Short Shift Kit I decided I would take the plunge for the TWM, considering it reduced both height and throw, noticably...
  15. NG900 & OG9-3 Workshop
    I've got a '99 9-3 Upon rolling up my rear pass. window the other day I heard a clunk and the window fell, pretty sure it's not the motor, maybe the regulator's dead but hoping it's just the bushings. I've read up on this problem and it seems pretty common, I did what most people would do...I...
Top