SaabCentral Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 14 Results
  1. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hello everyone in the forum I have a full bolt on e85 tuned 08 93 b207 automatic transmission, whenever i reach 130mph the engine cuts out and the car stops pulling. The car feels like it wants to keep going if it had the restrictions removed although i don’t want to push it too far and damage...
  2. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hi guys, haven't really been active on these forums but I'm a big saab guy with a not-so-crazy big budget to modify my car. I know in the past people on here have talked of putting a supercharger off of a LSJ Cobalt SS, but the question is always how do you get around the Trionic ECU in our...
  3. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hi, I currently own a 2008 Saab 9-3 (B207R) and was wondering how easy it’d be to swap the 2.0 for a 2.8 from a donor aero. I imagine id have a few things to do like mate the ecu to the engine if it bolts on directly. My main goal is make 300+Hp for this car. Any information is welcomed thanks!
  4. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Does anyone know if the engine from a 2005 95(i think it's a b234r) will fit in the 9-3 engine bay? It would be nice if everything lined up, but if not, how difficult would it be to do the swap? I'd like to keep the b207r, but there doesn't seem to be as much aftermarket support as the b234r...
  5. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    So my saab missfires when idling while warm. And missfires when hitting full boost in any gear under 3000rpm. But when you floor it it's fine. And has full power. There isn't any engine lights. No codes being thrown. And also recently my call will loose all power and completely shut off and I...
  6. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hey everyone, Can the cylinder head bolts on the 9-3SS B207R be retorqued in a similar fashion to the og9-3/9-5 motors? If so, what is the procedure and torque specs? I could not find anything in the SAAB WIS or in the SaabCentral archives. My coolant system pressurized and puked out all of the...
  7. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hey everyone, I have a 2009 9-3 XWD with the B207R engine. On every cold start, there seems to be a sound coming from the pulley side of the engine (Passenger side in Canada). Its not a rattle sound like a bad chain, but its not a squeak like a slipping serpentine belt either. Its between those...
  8. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    So, I want to put a diesel HX35 turbo on my 2006 Saab 9-3 2.0T. Yes, I realize how huge that turbo is--I'm planning on getting a custom manifold made so I can have the turbo sticking slightly out of the hood with it's own cooling scoop. I'm putting another scoop in the hood above the airbox. I...
  9. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    2006 9-3 aero 2.0T, B207R mated with the 5 speed FM55 gearbox. Tuned for about 360Nm Ever since I got the car over a year ago its had a gear whine in 5th - I just assumed it to be general wear since it had around 140k on the clock when I got it. Recently at 149k miles the whine has suddenly...
  10. My 9-3SC 2.0T

    The car was owned by the ocean for most of it's life before migrating down to Pennsylvania, but surprisingly no rust. It's had it's fair share of Saab-ish-ness though. Coils Ionization Module Strut Mounts Door Seals Vapor Barriers I used this as my daily until I traded my 2006 VW Passat for a...
  11. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    recently i picked up a td04-14t for my 04 9-3 LINEAR(2.0t), i planned to to go with the siemens deka 60# but ended up finding a 07 9-3 2.0T in the junk yard and snagged the injectors off of that. I swapped the injectors off of the junk car on to my linears fuel rail, but came to realize these...
  12. Parts for Sale/Wanted - North America
    I just finished a engine swap and I have ALOT of parts for sale. a few things of the top of my head. ECU Fuel rail various vacuum hoses and connections. intake butterfly control thing. valve cover plate 4 ignition coils THis is all for a B207R engine. 04-06 high pressure turbo
  13. Parts for Sale/Wanted - North America
    Looking to buy a b207r turbo (td04) from the 9-3 Saabs. Mainly the 2003-06 year models. Leave price, mileage and condition please.
1-13 of 14 Results
Top