SaabCentral Forums banner

air

  1. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Ok I’m having an issue with my A/C the compressor went out so I replaced it, now the drive side is blowing out cold air and the passenger side is blowing out hot air ???
  2. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Any one know the size of the inlet for the turbo? Looking to grab a kit off ebay so I can strap it around the opening.
  3. NG900 & OG9-3 Workshop
    Hey guys, just got a 2002 9-3 2.0 4 Door Hatchback. A/C seems to work fine and the blower is strong but the air never blows hot or warm on any setting. All fuses are good and antifreeze levels are norm. Car operates at normal temperature. I've searched the forums and couldn't find any info...
  4. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hi, Anyone know how much it might cost, and/or what parts these hoses are? It's in the front/middle (slightly passenger) side of the engine right behind the dipstick. The rubber hose broke off the engine and then about 6-9 inches towards the passenger side, the connecting hose that feeds into...
  5. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    My AC on my 06 aero went from woring like new, to just the radiator fan revving and no cold air. I just had a key made for it, which involves the tech 2, could it be a computer issue? maybe a battery reset would help? please help
  6. NG900 & OG9-3 Workshop
    I just bought a '96 900S convertible. Love it. I'm having a problem with the idle speed, which oscillates while I've got the clutch in. I suspect that the air intake is leaky, mostly because it seems to be missing a seal. Note that the two small screw holes in the second picture which have...
  7. NG900 & OG9-3 Workshop
    Hi I've go a 99 9-3 B204i with aircon but without centre idler pulley. I had a short belt fitted (iI believe 1805mm) to bypass the aircon due to clutch bearing problems but now getting around to changing the bearing and need to know the size of the correct belt. I'm told it's 6pk2345 but wanted...
  8. NG900 & OG9-3 Workshop
    I got my '99 9-3 from someone in pretty poor shape. I have been trying to get it back to its former glory and it's taking time and money. Most of the mechanical stuff is done by the Dealer, but I a perfectly capable of dismantling and reassembling interior items. One of the issues I recently...
  9. Parts for Sale/Wanted - North America
    Name: Jared Location - additional details: Lancaster, PA Means of contact: PM Price: <$100 Description: I would like to get new Air intake for my '07 9-3 2.0T. I would make my own, but I am not very handy. Plus I like that the BSR has the heat shield. If anyone has one with a shield they...
  10. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hi guys, I have a 2003 Saab 9-3 Arc. The A/C does not blow cold. The fan works and the air comes out but it doesn't blow out cold. I was wondering if any others had similar A/C problems and could post what the problem was on their individual car. Thanks!
  11. Cars for Sale - North America
    Vern Foxe Lisbon, Maine, USA 1-207-353-5423 or PM via SaabCentral.com $6,500/BRO The last year of the SPG, & one of only 109 Beryl Green Poly SPGs ever manufactured. Mileage is 146,000 miles. This car is inspected through June of 2014. The 5-speed shifts nicely, the clutch was just replaced...
  12. C900 Workshop
    Out of curiosity, would you remove your A/C system when it is in perfect working condition? I will hopefully be completing the timing chain job along with a new crank pulley over the winter (in two months). I have maybe used the A/C twice when I purchased the 86 SPG 9 months ago, I just dont...
  13. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Help needed looking for all the dimensions of a 2005 saab 93 front struts I need all the dimensions of a 2005 saab 93 and cad drawings if possible geting a set of custom air struts made up and need everything really all the sizes top plate bottom length every thing really on diagrams thought I...
  14. C900 Workshop
    Hello everyone! The Grey Ghost ('85 T16) is in the stages of dashboard and carpet replacement. I wired the air distribution switch correctly, but there's a slight problem. When I switch from OFF to the first setting to the left (large sideways arrows), I can hear the blower blowing at full...
  15. 9-5 Performance, Mods & Tuning
    Hey everyone, Just wanted to see what kinds of cold air intakes you guys use for your 9-5. I've been looking around and i havent been too successful haha. thanks in advance y'all.
  16. 9-5 Workshop
    Howdy! I have a 2001 9-5 linear. In November I took it to the mechanic because of a coolant leak. He fixed that, and also noticed that the engine was smoking. He determined that oil was getting into the air system. He tried replacing some suspicious looking tubes, but it didn't fix it. My...
  17. 9-5 Workshop
    2001 9-5 Linear, 140K Miles. Back in November my mechanic noticed that I had Oil in my air intake. See this picture to see where he showed me oil. In the large air intake to the engine (big oblong circle) and in the small tubes where the arrow is pointing. He's not a Saab mechanic, and after...
  18. 9-5 Workshop
    Hi, I have a 2001 9-5 linear. This is somewhat complicated as there may be multiple things happening. It started last May, my transmission light and engine light came on at the same time. I brought it in to my mechanic. He's not a Saab mechanic, just a neighborhood guy, but he has always...
  19. Parts for Sale/Wanted - North America
    I'm in need of the air shield from any '03 to '11 9-3. That part that's under the front bumper - looks like the thing in the picture.
  20. NG900 & OG9-3 Workshop
    So... the air shields listed from thesaabsite.com are ridiculously overpriced and right now, out of my price range. So... im thinking what if i use a couple of sheets of lexan that are laying around and fab them into air shields? has anyone done something remotely close to this? any pointers or...
Top