SaabCentral Forums banner

adjustment

  1. NG900 & OG9-3 Workshop
    Sorry to trouble with another question but how do you remove the headlight beam adjustment motor from the headlight unit? The book says to rotate 45 degrees (which I've done) then pull out with moderate force (which i can't without breaking something!)
  2. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Hi Guys, Not sure of the etiquette whether to add on to an existing thread or ask on a new one... I got my 9-3 at the beginning of last month and after reading the 'xenons not bright' thread, decided that my bulbs were dim from age and changed them using Philips bulbs, I noticed that my...
  3. 9-5 Performance, Mods & Tuning
    Just replaced the break booster, but after I installed it completely I figured out that the paddle leaver is still half inch away from switches, so how do I adjust the break paddle without opening the booster again? please if some one cans send me step by step instructions with pictures or videos
  4. 9-5 Workshop
    I was in an accident about 10 days ago (not my fault!!!). Sustained minor body damage, but I now have a problem with my brake pedal. When I take my foot off the pedal it it not returning enough to depress the relay and cut off the brake light. I have to put my toe behind the pedal and pull it...
  5. C900 Workshop
    8So I have heard that a common thing to check when you're not getting heat is to see if the control rod has been dislodged from the plastic housing it's supposed to fit in. The problem I have with mine, however, is where the plastic housing has broken off the white plastic bit that is attached...
  6. 9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I have a 9-3 2.2. TID 2003 model with Xenon lights. Over the past few weeks i have noticed the headlight when on dipped beam seem a bit low or not as bright as they used to be. Is there a way of adjusting the height of the beam as they have auto adjusting system?? Is there any known issues...
Top