SaabCentral Forums banner

Search results

1-20 of 181 Results
Advanced Search
  1. HVAC Blower motor issue

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    No, no water. I replaced the blower last year but not the resistor. Is this the regulator the same part as the resistor?
  2. HVAC Blower motor issue

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Ok so my blower motor works but it only works on a very low speed. This just started. No matter what setting I put the dial on the motor runs at the same low speed which I think is about notch 3 on the dial. Any ideas?
  3. Steering lock malfunction and car won't lock.

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    So I hooked up the tech2 and there was a fault related to the ISM. Here is the fault: So I cleared the DTCs with the Tech2 and it's working fine. I dunno wth is wrong. I hope it doesn't come back. I am contemplating just keeping my tech2 in the damn car from now on. I need a tech2...
  4. Steering lock malfunction and car won't lock.

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    So weird. So when I stop and take the key out of the ignition the radio stays on as if the key is still installed. I can turn it off and on a few times and I get the steering lock malfunction and the car won't lock with the fob. Eventually after messing with it for 5 minutes I can get the...
  5. Floor mat question...

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I actually tried that. Lol.
  6. Floor mat question...

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Nope. I can see where it should click in but it doesn't. Oh well. They don't seem to move.
  7. Floor mat question...

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Let me give it the Hulk try.
  8. Floor mat question...

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I'm pretty sure I didn't. They are posts in the floor and holes in the mats. They just sit there though. No locking connection.
  9. Floor mat question...

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    So I bought new OE floor mats from thesaabsite and I just dont get it. How do the posts on the floor connect to the mat? They don't seem to click in at all. It's almost as if they put it there just for looks. Am I missing the secret to making these mats click into place?
  10. The official Tech 2 clone thread

    Tech II Workshop
    I have a 7zip file with the XP vm. It's 7.5GB.
  11. The official Tech 2 clone thread

    Tech II Workshop
    I have an XP VM with tis2000 and globaltis on it. Let me see if I can get it down to an uploadable size.
  12. Brembo Brake upgrade useful links and facts

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Was a mess. https://www.saabcentral.com/forums/showthread.php?t=717250 I ended up buying two new calipers BUT in the process I found out how to rebuild Brembos. I still think this is the damn best mod you can do to your 9-3. Seriously. If you haven't dropped the $ on this yet you really...
  13. Sell my Saab? How much?

    The Lounge
    I could get 8k pretty easily. Unicorn with Brembos.
  14. Cobalt Brembo question/ favor needed...

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    A good way to get these out is to pry them out with a box cutter. The blade is just the right width and stiffness to coax these out without screwing up the cylinder walls.
  15. Cobalt Brembo question/ favor needed...

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    The Brembo dust boots I ordered should work. They look identical. BRE20.4872.45 is the part number. Unfortunately the cylinder walls on my caliper are toast so I ordered a new pair of calipers. I will use the parts to rebuild the other caliper so I have a good spare caliper.
  16. Brembo Brake upgrade useful links and facts

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    One of the inside pistons in my LF caliper is sticking and has caused that pad to wear down. I am going to tear down the caliper and rebuild it this weekend. Blech. I have tracked down all of the parts I think. I will post some pics and report back.
  17. Cobalt Brembo question/ favor needed...

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    So Gloria doesn't actually have these. She said she is trying to talk with the original supplier to GM. I received my pistons and have measured them at 38mm. I guess my only option is to buy the 38mm Brembo boots and hope they work.
  18. 08 9-3 Aero - Cornering Light malfunction warning

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    What was yours doing? Any codes?
  19. 08 9-3 Aero - Cornering Light malfunction warning

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I just tried that and I need security access. I have to dig around and find the cable to hook to my computer to unlock it. Pain in the butt.
  20. Cobalt Brembo question/ favor needed...

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Thanks! I sent her an email.
1-20 of 181 Results
Top