SaabCentral Forums banner

Search results

1-20 of 132 Results
Advanced Search
  1. FS: 2006 9-3 aero part out.

    Parts for Sale/Wanted - North America
    Ok how much for just calipers. I really need those? Are they for the 292mm rotors?
  2. F/S Two Direct Ignition Cassettes and Hester Valve 9-5

    Parts for Sale/Wanted - North America
    I have two cassettes that were spares for my 9-5 2007 and brand new heater valve. $60 plus shipping for cassettes and $25 plus shipping for heater bypass valve. one cassette has two white marks that I fixed because there were two very small cracks.
  3. WTB 2006 9-3 Aero Rear Shocks

    Parts for Sale/Wanted - North America
    If anybody has any looking for the rears for 2006 9-3 Aero.
  4. Rear alignment parts 9-3 Aero 2006??

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    And that would be for each side correct?
  5. Rear alignment parts 9-3 Aero 2006??

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Thanks for the diagram and part numbers. Will try and get pics
  6. Rear alignment parts 9-3 Aero 2006??

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Okay guys front alignment done but the rear had issues. Shop states the rear is out but they do not want to adjust cause whatever part they have to adjust might break cause of age and rust. Told me to replace those parts and they could then do alignment. What should or do I need to replace so...
  7. 2006 Aero 2.8 which oem plugs/ignition coil

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I am getting confused now. If I have a stock motor with no intention of tuning what gap should I be at?
  8. 2006 Aero 2.8 which oem plugs/ignition coil

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    So if I am not going to tune my motor the .044 is ok?
  9. 2006 Aero 2.8 which oem plugs/ignition coil

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Thanks for the reply’s. I’ve read .80-.90mm or .031-.035” is good. So you have answered my my question.
  10. 2006 Aero 2.8 which oem plugs/ignition coil

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Thanks for the reply. What’s the correct gap also?
  11. How To: Transmission Fluid Change on the Aisin Warner AWTF-80SC (06+ Aero Automatic)

    Engine Oil, Lubricants & Fluids
    Tranny Oil going to be doing this with in next couple of weeks and really confused on which oil I should use? Have 06 9-3 Aero with 139,000 and I am sure the transmission oil has never been changed. Is this okay to use...
  12. Changed rear pads to Akebono and now developed a clicking noise?

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Thanks for reply. I will double check and get them ordered. Like I said the driver side was gone and the passenger side was very loose when I put back on so I just figured it’s so loose it wasn’t doing anything anyway so just left it off. I believe the number is correct as I have 292mm rotors...
  13. Changed rear pads to Akebono and now developed a clicking noise?

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    This is the item I am talking about
  14. Changed rear pads to Akebono and now developed a clicking noise?

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Are those the items that I didn’t put on what your are talking about? They are in the outside of caliper. How could not having those one keep the pads from rattling?
  15. Changed rear pads to Akebono and now developed a clicking noise?

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Any input appreciated, Changed the rear pads to Akebono because the rear pads were shot. I am now getting a clicking noise at low speeds that goes away when you apply brake, then comes back when you let off brake. The drivers side was missing the spring clip retainer and the passenger side was...
  16. New front end suspension parts have?

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    2006 Saab 9-3 Aero the alignment was fine and steering wheel was dead 12 o'clock to go straight. Was having clunking sounds when hitting bumps. Decided to get the Strut assembly kit sport suspension from EEuroparts and installed today. Know I have couple questions after install. The front end...
  17. A/C compressor removal V6 anyone ever remove or replace?

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I have what sounds like a noisy bearing when I turn A/C on and was wondering if anyone ever removed or replaced the compressor to fix the bearing?
  18. Have a strut kit assembly question. 06 9-3 Aero 2.8

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Ok. So these Saab OE struts will be equivalent to what I have on now?
  19. Have a strut kit assembly question. 06 9-3 Aero 2.8

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Trying to get the strut kit assembly from eEuroparts and the kit includes Saab oem struts. I thought Sachs was the oe part for my car. When I go and click on strut assembly kit for Sachs it state for fwd 4 cylinder only. Can anyone enlighten me on this OEM vs Sachs?
  20. Opinions needed between two 9-3 buys!!!

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Thanks
1-20 of 132 Results
Top