SaabCentral Forums banner

Search results

1-20 of 199 Results
Advanced Search
  1. ECU Heat Protection

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    I will have to comment on that, but heat is not a proven reason for ECU failures, i dont think anybody else experience temperatures as we do here in Dubai, yet we have limited number of failures throw the years ..
  2. P0300 at idle - ideas?

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Maybe, does it read misfire counts ?? Or does it say anywhere in the software Mode6 .. maybe try different softwares until u find this functionality.. Then, with ur scan tool/phone reading that, run the car at idle until it starts misfiring and check which cylinders are counting misfires and...
  3. P0300 at idle - ideas?

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Do u have a scantool that reads live data ?
  4. Been dealing with a boost spike issue for a couple of weeks, please help me fix it!

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Aha, as long as it is not below 2 u should be good to go.. if it is lower the waste-gate could flutter even under boost and let boost level drop.
  5. 7 ABS Codes!! - Was it the battery?

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Not necessary ..
  6. 7 ABS Codes!! - Was it the battery?

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Dont overthink .. replace the battery
  7. Been dealing with a boost spike issue for a couple of weeks, please help me fix it!

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    how many many psi did u set ur preload at ?
  8. Tech2 and LED flickering

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Cant be done with tech2
  9. Series of Screw Ups... Is it possible that it's just an old car or is it a scam?

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Yes u can .. would u like a video !
  10. 2009 Saab 9-3 Bucking Under Load

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Its a 2009 car right ?? Then incorrect forum.. Thats a side, u will need a scanner with live data capability to figure out which cylinder is misfiring .
  11. Questions You think are too stupid to ask

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    its the magical device that can help u fix SAABs
  12. WILL START but won't go into gear w/o violence!!

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    clutch is severely worn out, or master or slave cylinder is toast. i would start at the master clyinder, if not.. then u need to deop the transmission to do both a clutch and a slave cylinder
  13. 2009 Saab 9-3 Bucking Under Load

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    By the way, some admin has to move ur post to the correct forum the other 93
  14. 2009 Saab 9-3 Bucking Under Load

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    It depends on whats ur budget, usually its one coil that failed, and if ur spark plugs are there for more than 40k then its a smart choice to replace them. but for coils, make sure u buy original coils as described in the sticky of the forum, they are expensive, if i was u i would invest in a...
  15. 2009 Saab 9-3 Bucking Under Load

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Nop .. do u have a scanner that can read live data ?
  16. 2009 Saab 9-3 Bucking Under Load

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Coils
  17. P0300 fun

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    If no leaks founds, pull the MAF and inspect/clean it .. redo fuel/air deviation and report back ..
  18. Stability Control Failure + stuck gauges + engine stopped

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    yes u can, its ur car eventually
  19. Stability Control Failure + stuck gauges + engine stopped

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    The traction control unit/abs unit is responsible of providing speed reading for the various car computers through the network ., but that doesn't mean u point fingers to it.
  20. 2007 9-3 coil spring replacement?

    9-3 Sedan, Cabrio '04+, Combi, 9-3X Workshop
    Im not in us, but i know from friends its anywhere between 70-100/hour Job require 1.8 hours for both sides
1-20 of 199 Results
Top