Remove seat bottom.
Disconnect heater element.
Cut C clamps which secures leather to seat cushion.
Keep ignition key in your pocket.
Raise seat in highest position
Move seat in front position and fold backrest to front.
Remove seat securing bolts and seat belt mounting bolt.
Tip seat forward and lift it.
Unplug seat connector and lift seat out.
Place seat in table etc that you can access bottom.
Remove side panel (screw in back).
Remove upholstery strips from front and both sides.
Remove seat upholstery hooks from bottom.
Remove backrest upholstery hooks.
Sorry, but I am not mind reader, so I just answer questions.