Saab Central - Technical Help

Classic Saab 9000: Recommended Service Schedules 1 (2)

All 4 cylinder models 1985 to 1995 - Component or system Lubricant type/specification

• Engine Multigrade engine oil, viscosity SAE 10W/30, 10W/40, 5W/30 or 5W/40, to API SG and CCMC G4/G5 specifications
• Cooling system Ethylene glycol-based antifreeze
• Manual transmission 10W/30 or 10W/40 (synthetic oil not to be used)
• Automatic transmission Dexron type II ATF
• Driveshaft CV joints Outer driveshaft: Molycote VN 2461C lnner driveshaft: Mobil grease GS 57C
• Brake and clutch hydraulic systems Hydraulic fluid to DOT 4
• Hub/wheel bearings Multi-purpose lithium-based grease
• Steering rack Multi-purpose lithium-based grease
• Power steering Saab or GM power steering fluid

Capacities

• Engine oil lncluding filter: B202 engine 4.2 litres
• B234 engine (up to 1993) 4.3 litres
• B204 and B234 engines (1994 onwards) 5.5 litres
• Difference between MAX and MIN dipstick marks 1 .O litre

Cooling system

All engines 9.0 litres (approximate)

Manual transmission:

• Up to 1993 2.5 litres
• 1994 onwards 1 .8 litres

Automatic transmission including torque converter and fluid cooler:

• 2.0 litre models 8.2 litres (approximate)
• 2.3 litre models 8.7 litres (approximate)
• Service fluid change 3.0 to 3.5 litres

Fuel tank

• 1985 to 1 989 models 68 litres (1 5 gallons)
• 1990 and 1992-on models 66 litres (14.5 gallons)
• 1991 models 62 litres ( 13.6 gallons)

Power steering All models: 0.75 litre

Page 2 of 2 - Back<<

copyright © 2003 saabcentral.com, All rights reserved - website by WDD serviceshttp://www.whiter.co.uk - valid xhtml - valid css
SaabCentral is an independently run website and is not affiliated in any way to Saab Automobile AB