It's alive again!
After three weeks of sitting in my garage my 91 900s is back again.It was having troble with the ignition. After replacing all the parts with parts from a parts car I found out the Hall sensor was bad on both cars. After having this problem I have realy learned how the whole ignition system works,and how to test every thing proper. I orderd one of those aftermarket Hall sensors $56 from The Saab Site. Had to solder in the wires and use my old bracket but that beats buying the fact. one $250. The actual part looked exactly like the old one, same markings too.
ps. I made an easer way to get the crank pully off.
__________________
"SAAB people are the best." Glenn Beck
|
17-04-07
Linear Mode
