SaabCentral Power Engineering Rolling Road Day 10/07/04

[Paul]

The rolling road day at Power engineering is booked for Saturday 10th July

The cost will be £35 per car including VAT, this is based on a minimum number of 15 cars on the rollers. For those that haven't been before PE is in Uxbridge, NW London very close to the M25.

Power Engineering,
The Power House,
8 Union Buildings,
Wallingford Road,
Uxbridge,
Middlesex
UB8 2FR
England

A location map can be found here

The rolling road session starts at 9am

All are welcome, please add your name to the list if you wish to join us

[1] Paul
[2]
[3]
[4]
[5]
[6]

[Rhino2.3t]

umm.. what if you're 'between Saabs'?
i'm sure the Fiat Brava 1.4S must be pushing near 57bhp (bling horsepower) at the wheels... wouldn't want to get laughed at mind :wink:

[Alanb]

[1] Paul
[2] Alanb
[3]
[4]
[5]
[6]

[ragtopcav]

[1] Paul
[2] Iain [ragtopcav] but which car shall I bring ?
[3]
[4]
[5]
[6]

Late June [26th?] sounds good to me.

[Simon]

[1] Paul
[2] Alan B
[3] Iain [ragtopcav] but which car shall I bring ?
[4] Simon
[5]
[6]

[Alanb]

Late June is best for me as well.

Alanb

[ragtopcav]

Starting to look like the same old riff raff again, should be fun, certainly was last time. A real eye opener too. Anyone whom was there there last time and has since made some changes this'll be the chance to see if they were worth it.

[Matthew]

The SOC National is 18th - 20th June.

Raggy, have you had your 900 dynoed since installing the new lairy cams and big-bore throttle body?

On the dyno:
[1] Paul
[2] Alan B
[3] Iain [ragtopcav] but which car shall I bring ?
[4] Simon
[5]
[6]

Spectating:
[1] Matthew
[2]
[3]
[4]

Pub lunch afterwards
[1] Paul
[2] Alan B
[3] Iain
[4] Simon
[5] Matthew
[6]
[7]

I took the liberty of adding all your names to the "pub lunch" list

[ragtopcav]

Originally Posted by Matthew

Raggy, have you had your 900 dynoed since installing the new lairy cams and big-bore throttle body?

the throttle body mod was done because of the way it drove after fitting the cams, hence it'll be really fascinating to see what the same rolling road results show.

Originally Posted by Matthew

I took the liberty of adding all your names to the "pub lunch" list

Liberty accepted are we going to go to the same pub with all the weapons [bottles] lined up [ornamentally arranged] .
Hey I'm from Coventry, spotting a usable weapon is a birthright

[Paco]

Originally Posted by ragtopcav

Starting to look like the same old riff raff again.

Fraid not, having just "lost" the Carly we would appear to be without a functioning Saab (mind you, by June....?)

Of course there's a chance my 900 will turn up in the care of it's new owner, although nothing has been changed on it since last time.....

[ragtopcav]

Paco, bring the big cat, we're car nut enough to enjoy anyhow.

[Paco]

Hmmm...it would be interesting to see what she puts out, torque in particular.... 8)

[Nuts]

Late June might be a problem as I'll be moving around then. Early June might be difficult as well as I'll be fitting/tuning the extra injectors However I'll put my name down for now.

On the dyno:
[1] Paul
[2] Alan B
[3] Iain [ragtopcav] but which car shall I bring ?
[4] Simon
[5] Sam (Nuts)
[6]

Spectating:
[1] Matthew
[2]
[3]
[4]

Pub lunch afterwards
[1] Paul
[2] Alan B
[3] Iain
[4] Simon
[5] Matthew
[6] Sam
[7]

[Jezzadee]

On the dyno:
[1] Paul
[2] Alan B
[3] Iain [ragtopcav] but which car shall I bring ?
[4] Simon
[5] Sam (Nuts)
[6] Jezzadee

Spectating:
[1] Matthew
[2]
[3]
[4]

Pub lunch afterwards
[1] Paul
[2] Alan B
[3] Iain
[4] Simon
[5] Matthew
[6] Sam
[7]

[Rob Sandey]

On the dyno:
[1] Paul
[2] Alan B
[3] Iain [ragtopcav] but which car shall I bring ?
[4] Simon
[5] Sam (Nuts)
[6] Jezzadee
[7] Rob S. (to see what difference the Viggen IC has made)
[8]
[9]
[10]

Spectating:
[1] Matthew
[2]
[3]
[4]

Pub lunch afterwards
[1] Paul
[2] Alan B
[3] Iain
[4] Simon
[5] Matthew
[6] Sam
[7] Rob S.
[8]
[9]
[10]

[boxman]

On the dyno:
[1] Paul
[2] Alan B
[3] Iain [ragtopcav] but which car shall I bring ?
[4] Simon
[5] Sam (Nuts)
[6] Jezzadee
[7] Rob S. (to see what difference the Viggen IC has made)
[8] boxman
[9]
[10]

Spectating:
[1] Matthew
[2]
[3]
[4]

Pub lunch afterwards
[1] Paul
[2] Alan B
[3] Iain
[4] Simon
[5] Matthew
[6] Sam
[7] Rob S.
[8]
[9]
[10]

[Rob Sandey]

Originally Posted by Paco

Hmmm...it would be interesting to see what she puts out, torque in particular.... 8)

Go on Paco bring the Big Cat, I would to see and hear it powering those rollers :wink:

[akamal]

Sounds like a excellent idea, and perfect timing...


On the dyno:
[1] Paul
[2] Alan B
[3] Iain [ragtopcav] but which car shall I bring ?
[4] Simon
[5] Sam (Nuts)
[6] Jezzadee
[7] Rob S. (to see what difference the Viggen IC has made)
[8] boxman (depending on date cant do soc weekend or one before)
[9] Amir (akamal) hopefully with 3" downpipe and a working clutch!
[10]

Spectating:
[1] Matthew
[2]
[3]
[4]

Pub lunch afterwards
[1] Paul
[2] Alan B
[3] Iain
[4] Simon
[5] Matthew
[6] Sam
[7] Rob S.
[8] Amir
[9]
[10]

[Paco]

Oh go on then :wink:

On the dyno:
[1] Paul
[2] Alan B
[3] Iain [ragtopcav] but which car shall I bring ?
[4] Simon
[5] Sam (Nuts)
[6] Jezzadee
[7] Rob S. (to see what difference the Viggen IC has made)
[8] boxman (depending on date cant do soc weekend or one before)
[9] Amir (akamal) hopefully with 3" downpipe and a working clutch!
[10]Paco XJ6 Viggen...

Spectating:
[1] Matthew
[2]
[3]
[4]

Pub lunch afterwards
[1] Paul
[2] Alan B
[3] Iain
[4] Simon
[5] Matthew
[6] Sam
[7] Rob S.
[8] Amir
[9] Paco (obviously)
[10]

[Paul]

I've just booked the day for Saturday July 10th, unfortunately this was the only available Saturday PE had anywhere around the end of June...

The cost will be £35 incl VAT per car based on a minimum of 15 cars on the rollers

I'll be moving this thread into the events forum shortly.