|
|
|
|||||||
| Register | Garage | Photo Gallery | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Auto Escrow | Auto Loans | Insurance |
| Classic Saab 900 Performance, Mods & Tuning Covers Tuning & Performance modifications for the Classic Saab 900 |
![]() |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
I see a lot of info on how to mod the ecu
and I was just wondering how these mods compare to the red box and other aftermarket box/kits
__________________
1992 saab 900T16 with Lucas |
| Sponsored Links | ||
Advertisement | ||
|
#2
|
|||
|
|||
|
I bought my chip from swedish dynamics and it was well worth it. If you get a chip you want to add larger injectors and fpr. This will give you stable boost without knock untill your intercooler gets heatsoaked. I did the stage 4 red box, chip, 40 lb/hr injectors, 3 bar fpr, and fmic. I had a stock spg before and after i did all that, the difference was amazing. I did it all in 2 days. i took the car for a drive before i started. Then after i finished all of that i listed. I bought all the parts then did it all in one shot. And the difference was mind blowing. If it wasn't for the fact my clutch was slipping i would peg the boost gauge in the red all day long with out any knock. I also added a knock LED so i know when i knock an when i don't. I havnt had any running about mid red boost completely stable.
But in short, a chip alone won't give you alot of added power, but in combination will do WONDERS. |
| Sponsored Links | |
Advertisement | |
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|