Rear Brake/stop lights

[tarkak9]

I've just had 2 bulbs in the strip sitting in the hatch go out.

SID is fine, nothing saying anything but obviously wanting to replace the bulbs.. stupid question but is it easy enought to remove the trim and replace the bulbs or is there more to it than that? I haven't looked closely at it just yet as I am stuck here at work - I've searched the forum prior and all are referencing the usual brake lights; this pm going to go and get the bulbs and replace them tonight.

[earthworm]

The trunk tools may be used to remove the paper panel on the hatch.

Either 4 or 6 ea 1/4 turn plastic "screws" and 4 or 6 regular Phillips or Torx screws and the cover is free to fall, exposing the 4 brake light.
The side black plastic trim pieces have to be loosened; under neath are two more screws..

[hkayssi]

Pages 3 and 4

http://www.genuinesaab.com/psi/files...rr+spoiler.pdf

[earthworm]

Originally Posted by hkayssi

Pages 3 and 4

http://www.genuinesaab.com/psi/files...rr+spoiler.pdf

"There was an error and the file could not be opened"..

IMO, .pdf. files are troublesome at best, but maybe there is something wrong with my Adobe reader...

[hkayssi]

Hmmmmm, I can open it just fine