c-900 skidplates

[scubasaab]

Just spoke to John and the fabricator got the CAD for the curve and bend.
As the raw dimensions were already cut and the holes drilled, the plates should be on the way very soon!!

[c900]

Originally Posted by scubasaab

Just spoke to John and the fabricator got the CAD for the curve and bend.
As the raw dimensions were already cut and the holes drilled, the plates should be on the way very soon!!

Having had one of these skidplates for a few years now I can vouch for them! Now my 83 900S is out of rego long enough to be needing a complete mechanical inspection, I'm going to transfer bits from it to the 81 turbo and the first one to go today will be the big skidplate.

They're excellent and even though they cost a lot, and can be a little tricky to fit (since they do not attach to any of the standard skidplate mounting locations, and are quite heavy), but the result is definitely worth the effort.

Craig.