Greddy type R BOV?

[Booost]

I just realized I have one with a soft spring in it. I might see about fitting it to the stock location. I can bond a thicker piece of plastic to the charge air tube that I can bond nuts into. I can probably do it on brake.

I figure why not. Lol. My stock BPV is junk.

[TankTak]

Originally Posted by Booost

I just realized I have one with a soft spring in it. I might see about fitting it to the stock location. I can bond a thicker piece of plastic to the charge air tube that I can bond nuts into. I can probably do it on brake.

I figure why not. Lol. My stock BPV is junk.

if its recirculating then why not, otherwise no cause the t7 software will see it as a air leak and trim fuel as needed and cause all sorts of problems

[Booost]

It was on a supra we built to win at dino drags and street race. Cosmeticaly the car was stock with a stock muffler with an electric cutout after the downpipe. We ran a bypas valve not an atmosphere vent to keep it quiet. The thing would do 540hp on a good day. Eventualy the guy went nuts with the thing and went all drag. It was unreal.

That's what I miss most about having a shop. Rich *******s would just leave us with all there extra parts.

[bornfromjets03]

Post pics if you do something custom

[Booost]

I'll try. My phone is all messed up but I should be getting my upgrade July 10th